Qvis I-ZEUSL-4 User Manual
  1. Manuals
  2. Brands
  3. Qvis Manuals
  4. DVR
  5. I-ZEUSL-4
  6. User manual

Qvis I-ZEUSL-4 User Manual

4 channel 1u standalone dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

iZEUS LITE 4 CHANNEL
I-ZEUSL-4
4 Channel 1U Standalone DVR
User's Manual
V1.0 01 / 2014

Advertisement

Table of Contents
loading

Related Manuals for Qvis I-ZEUSL-4

Summary of Contents for Qvis I-ZEUSL-4

  • Page 1 LITE 4 CHANNEL I-ZEUSL-4 4 Channel 1U Standalone DVR User’s Manual V1.0 01 / 2014...
  • Page 2 © Copyright Qvis ®. All documentation rights reserved.

  • Page 3: Table Of Contents

    3.1 Login, Logout & Main Menu ......................14 3.1.1 Login ............................14 3.1.2 Main Menu ..........................15 3.1.3 Logout ............................15 3.1.4 Auto Resume after Power Failure ................... 16 3.1.5 Replace Button Battery ......................16 © Copyright Qvis ®. All documentation rights reserved.
  • Page 4 3.10.2 Activate Preset ........................41 3.10.3 Patrol setup (Tour Setup) ...................... 41 3.10.4 Activate Patrol (tour) ......................41 3.10.5 Pattern Setup ......................... 41 3.10.6 Activate Pattern Function....................... 41 3.10.7 Auto Scan Setup ........................41 © Copyright Qvis ®. All documentation rights reserved.
  • Page 5 4.6.3 Log ............................71 4.6.4 Version ............................. 72 4.6.5 Online Users ..........................73 4.7 Shutdown ............................73 AUXILIARY MENU ..................74 5.1 Go to Pan/Tilt/Zoom Menu......................74 5.1.1 3D Intelligent Positioning Key ....................75 © Copyright Qvis ®. All documentation rights reserved.
  • Page 6 Event ..........................108 6.8.3.1 Video detect ........................108 Motion Detect ......................... 108 6.8.4 Storage ..........................117 6.8.5 System ..........................122 6.8.6 Advanced ........................... 136 6.8.7 Information ......................... 138 6.9 Search ............................140 © Copyright Qvis ®. All documentation rights reserved.
  • Page 7 6.10 Alarm ............................. 143 6.11 Log out ..........................144 6.12 Un-install Web Control ......................144 FAQ ......................145 © Copyright Qvis ®. All documentation rights reserved.
  • Page 8 Here you can find information about the corresponding DVR’s features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully! © Copyright Qvis ®. All documentation rights reserved.

  • Page 9: Important Safeguards And Warnings

    Contact your local retailer ASAP if something is broken in your package. 7. Lithium battery  Improper battery use may result in fire, explosion, or personal injury!  When replace the battery, please make sure you are using the same model! © Copyright Qvis ®. All documentation rights reserved. viii...

  • Page 10: Features And Specifications

    PTZ control.  Alarm activation function: Several relay alarm outputs to realize alarm activation and on-site light control. The alarm input port and output has the protection circuit to guarantee device safety. © Copyright Qvis ®. All documentation rights reserved.

  • Page 11: Specifications

    Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s Record per channel Speed Video 1/4 windows(Optional) Partition Monitor Supports monitor tour functions such as alarm, motion detection, and Touring schedule auto control. PAL（625TV Line，50f/s），NTSC（525TV line，60f/s） Resolution © Copyright Qvis ®. All documentation rights reserved.
  • Page 12 When hard disk is full, system can overwrite previous video file. Record Various search engines such as time, type and channel. Search Playback Various fast play, slow play speeds, manual frame by frame playback Mode and reverse play mode. © Copyright Qvis ®. All documentation rights reserved.
  • Page 13 Backup to 1024 log files. statistics Support various search engines such as time and type. Display version information: channel amount, system version and release Version date. On-line user Display current on-line user © Copyright Qvis ®. All documentation rights reserved.
  • Page 14 DC +12V / 2A Power Power General Consumptio 12W (Exclude HDD) Parameter Working 0℃－＋55℃ Temperatur Working 10%－90% Humidity 86kpa－106kpa Pressure Dimension 325 x242 x55mm (W*D*H) Weight 1.25KG(Exclude HDD) Installation Desktop installation Mode © Copyright Qvis ®. All documentation rights reserved.

  • Page 15: Overview And Controls

    One-window monitor mode, click this button to display assistant function: PTZ control and image color. Assistant Backspace function: in numeral control or text control, press it for 1.5seconds to delete the previous character before the cursor. © Copyright Qvis ®. All documentation rights reserved.

  • Page 16: Rear Panel

    Please refer to the following sheet for detailed information: Video CVBS output USB Port Video Input Audio Input Audio Output Video VGA output Network port RS 485 port Power input port Power button © Copyright Qvis ®. All documentation rights reserved.

  • Page 17: Connection Sample

    1.3 Connection Sample Please refer to Figure 1-3 for the connection example. The following figure is based on one 8-channel series. Figure 1-3 Connecting sample © Copyright Qvis ®. All documentation rights reserved.

  • Page 18: Mouse Control

    Implement special control operation such as double click one item in the file list click mouse to playback the video. In multiple-window mode, double left click one channel to view in full-window. Double left click current video again to go back to previous multiple-window mode. © Copyright Qvis ®. All documentation rights reserved.

  • Page 19: Virtual Keyboard & Front Panel

    < to shift between small character and capitalized character. 1.5.2 Front Panel Move the cursor to the text column. Click Fn key and use direction keys to select number you wanted. Please click enter button to input. © Copyright Qvis ®. All documentation rights reserved.

  • Page 20: Installation And Connections

    The camera and the DVR should have the same signal grounding to ensure the normal operation of both devices. GUARANTEE STABILITY AND RELIABILITY OF THE TRANSMISSION LINE BTTTB Please use high quality, sound shielded BNC. Please select suitable BNC model according to the transmission distance. © Copyright Qvis ®. All documentation rights reserved.

  • Page 21: Connecting Video Output

    If the sound box and the pick-up cannot be separated spatially, it is easy to arouse squeaking. In this case you can adopt the following measures:  Use better sound pick-up with better directing property.  Reduce the volume of the sound box. © Copyright Qvis ®. All documentation rights reserved.

  • Page 22: Rs485

    2. Connect the other end of the cable to the proper pins in the connector on the camera. 3. Please follow the instructions to configure a camera to enable each PTZ device on the DVR. Figure 2-1 © Copyright Qvis ®. All documentation rights reserved.

  • Page 23: Overview Of Navigation And Controls

    Note: For security reason, please modify password after you first login. Failure to login in after three attempts will result in the system alarm being triggered and after five failed logins the account will be locked! Figure 3-1 © Copyright Qvis ®. All documentation rights reserved.

  • Page 24: Main Menu

    The other ways is to press power button on the front panel for at least 3 seconds, system will stop all operations. Then you can click the power button in the rear panel to turn off the DVR. © Copyright Qvis ®. All documentation rights reserved.

  • Page 25: Auto Resume After Power Failure

    If you want to change system date and time, you can refer to general settings (Main Menu->Setting->General). If you want to modify the channel name, please refer to the display settings (Main Menu->Setting->Display). © Copyright Qvis ®. All documentation rights reserved.

  • Page 26: Manual Record

    Schedule: Channel records as you have set in recording setup (Main Menu->Setting->Schedule)  Manual: The highest priority. After manual setup, all selected channels will begin ordinary recording.  Stop: All channels stop recording. Figure 3-2 © Copyright Qvis ®. All documentation rights reserved.

  • Page 27: Enable/Disable Record

    When system is in schedule recording, all the channels will record as you have previously set (Main menu->Setting->Schedule). The corresponding indication light in front panel will turn on. Figure 3-4  All channel manual record Please highlight “ALL” after “Manual.” See Figure 3-5. © Copyright Qvis ®. All documentation rights reserved.

  • Page 28: Stop All Channel Recording

    3.3.5 Stop all channel recording Please highlight “ALL” after “Stop”. See Figure 3-6. System stops all channel recording no matter what mode you have set in the menu (Main menu - >Setting->Schedule) Figure 3-6 © Copyright Qvis ®. All documentation rights reserved.

  • Page 29: Search & Playback

    Click search button in the main menu, search interface is shown as below. See Figure 4-12. Usually there are three file types:  R: Regular recording file.  A: External alarm recording file.  M: Motion detection recording file Figure 3-12 © Copyright Qvis ®. All documentation rights reserved.
  • Page 30 In playback mode, click it to use various slow play modes such as slow play 1, slow play 2, and etc. Fast forward  In playback mode, click to use various fast play modes such as fast play © Copyright Qvis ®. All documentation rights reserved.
  • Page 31 Drag your mouse in the screen to Digital zoom select a section and then left click mouse to operate digital zoom. You can right click mouse to exit. © Copyright Qvis ®. All documentation rights reserved.

  • Page 32: Basic Operation

    (that is your new file beginning point). Drag the file to the end point (that is your new file end point) and then click the again. Click the backup button to save your current new file. © Copyright Qvis ®. All documentation rights reserved.

  • Page 33: Calendar

    The highlighted date means there are record files in that day. You can click blue date to view file list. Figure 3- , there are video files in 13 June and 14 June. Double click the date to view its file list. Figure 3-13 © Copyright Qvis ®. All documentation rights reserved.

  • Page 34: Schedule

    The white means the MD and alarm record is valid. Once you have set to record when the MD and alarm occurs, system will not record neither motion detect occurs nor the alarm occurs. Figure 3-14 © Copyright Qvis ®. All documentation rights reserved.

  • Page 35: Snapshot

     In Encode interface, click snapshot button to input snapshot mode, size, quality and frequency.  In General interface please input upload interval. © Copyright Qvis ®. All documentation rights reserved.

  • Page 36: Image Ftp

    In Network interface, you can set FTP server information. Please enable FTP function and then click save button. See Figure 4-18. Please boot up corresponding FTP server. Please enable schedule snapshot or activation snapshot first, now system can upload the image file to the FTP server. © Copyright Qvis ®. All documentation rights reserved.

  • Page 37: Detect

    ENTER button to exit current setup. Do remember click save button to save current setup. If you click ESC button to exit the region setup interface system will not save your zone setup. © Copyright Qvis ®. All documentation rights reserved.
  • Page 38 , you can left click mouse and then drag it to set a region for motion detection. Click Fn to switch between arm/withdraw motion detection. After setting, click enter button to exit. Figure 3-21 © Copyright Qvis ®. All documentation rights reserved.
  • Page 39 Figure 3-22 Figure 3-23 Figure 3-24 Figure 3-25 © Copyright Qvis ®. All documentation rights reserved.

  • Page 40: Video Loss

    It is null for other detect types.  System only enables camera masking function during the period you set here. It is null for motion detect or video loss type. © Copyright Qvis ®. All documentation rights reserved.

  • Page 41: Alarm Setup And Alarm Activation

    Send email: System can send out email to alert you when alarm occurs.  Record channel: you can select proper channel to record alarm video (Multiple choices). At the same time you need to set alarm record in schedule interface (Main Menu- © Copyright Qvis ®. All documentation rights reserved.
  • Page 42 For snapshot operation, please refer to chapter 4.4.2. Please highlight icon to select the corresponding function. After setting all the setups please click save button, system goes back to the previous menu. Figure 3-28 Figure 3-29 © Copyright Qvis ®. All documentation rights reserved.

  • Page 43: Backup

    Click backup button, you can see an interface is shown as in Figure 4-32. Here is for you to view devices information. You can view backup device name and its total space and free space. The device includes USB burner, flash disk, SD card, portable HDD and eSATA. © Copyright Qvis ®. All documentation rights reserved.

  • Page 44: Backup

    Click backup button, you can backup selected files. There is a process bar for you reference. When the system completes backup, you can see a dialogue box prompting successful backup. Figure 3-33 © Copyright Qvis ®. All documentation rights reserved.

  • Page 45: Ptz Control And Color Setup

    Please follow the procedures below to go on cable connection: 1. Connect the dome RS485 port to DVR 485 port. 2. Connect dome video output cable to DVR video input port. 3. Connect power adapter to the dome. © Copyright Qvis ®. All documentation rights reserved.

  • Page 46: Ptz Setup

    After completing all the setting please click save button. In one window display mode, right click mouse (click “Fn” Button in the front panel or click “Fn” key in the remote control). The interface is shown as in Figure 4-36. © Copyright Qvis ®. All documentation rights reserved.
  • Page 47 Please click icon to adjust zoom, focus and iris. Figure 3-37 In Figure 4-37, please click direction arrows (See Figure 4-38) to adjust PTZ position. There are total 8 direction arrows. Figure 3-38 © Copyright Qvis ®. All documentation rights reserved.

  • Page 48: Intelligent Positioning Key

    In Figure 4-37, please click the “Set” button. The interface is shown as below. See Figure 4-40. Here you can set the following items:  Preset  Tour  Pattern  Border Figure 3-40 © Copyright Qvis ®. All documentation rights reserved.

  • Page 49: Preset Setup

    In Figure 4-37, use eight direction arrows to adjust camera to the proper position. In Figure 4-40, click preset button and input preset number. The interface is shown as in Figure 4-42. Now you can add this preset to one tour. Figure 3-42 © Copyright Qvis ®. All documentation rights reserved.

  • Page 50: Activate Preset

    Figure 4-40, input mode value in the No. blank, and click pattern button. X346H346H346H 3.10.7 Auto Scan Setup In Figure 4-40, click border button. The interface is shown as in Figure 4-45. X348H 348H 348H © Copyright Qvis ®. All documentation rights reserved.

  • Page 51: Activate Auto Scan

    Here you can set auxiliary function. The aux value has relation ship with the Aux button of the decoder. Click page switch button again, system goes back to Figure 4-37. Figure 3-46 © Copyright Qvis ®. All documentation rights reserved.

  • Page 52: Understanding Of Menu Operations And Controls

    Encode Schedule RS232 Menu Network Alarm Detect Pan/ Tilt/Zoom Display Default Search Advanced HDD Management Alarm Output Abnormity Manual Record Account Auto Maintain TV Adjust Video Matrix Title Overlay Config Backup Shutdown © Copyright Qvis ®. All documentation rights reserved.

  • Page 53: Main Menu

    You can see an interface is shown as in Figure 4-4. Here you can set start time and end time by setting corresponding week setup. In Figure 4-4X, enable date button, you can © Copyright Qvis ®. All documentation rights reserved.
  • Page 54 Before your time modification, please stop the record operation first! After completing all the setups please click save button, system goes back to the previous menu: Figure 4-3 © Copyright Qvis ®. All documentation rights reserved.

  • Page 55: Encode

     Video/audio: You can enable or disable the video/audio.  Overlay: Click overlay button, you can see an interface is shown in Figure 4-7. Please highlight icon to select the corresponding function. © Copyright Qvis ®. All documentation rights reserved.
  • Page 56  Channel display: You can select system displays channel number or not when you playback. Please click set button and then drag the title to the corresponding position in the screen. © Copyright Qvis ®. All documentation rights reserved.

  • Page 57: Schedule

    Function: Console  Baud rate:115200  Data bit: 8  Stop bit:1  Parity: None After completing all the setups please click save button, system goes back to the previous menu. Figure 4-8 © Copyright Qvis ®. All documentation rights reserved.

  • Page 58: Network

    Figure 4-9  Advanced Setup Advanced setup interface is shown as in Figure 4-10. Please draw a circle to enable corresponding function and then double click current item to go to setup interface. © Copyright Qvis ®. All documentation rights reserved.
  • Page 59 Please note after you enabled this function, only the IP listed below can access current DVR. If you disable this function, all IP addresses can access current DVR. Figure 4-11  Multiple Cast Setup Multiple-cast setup interface is shown as in Figure 4-12. Figure 4-12 © Copyright Qvis ®. All documentation rights reserved.
  • Page 60 Click save button, you need to restart to activate your configuration. After rebooting, DVR will connect to internet automatically. The IP in the PPPoE is the DVR dynamic value. You can access this IP to visit the unit. © Copyright Qvis ®. All documentation rights reserved.
  • Page 61 Tokyo GMT+9 Sydney GMT+10 Hawaii GMT-10 Alaska GMT-9 Pacific Time(P.T) GMT-8 American Mountain Time(M.T) GMT-7 American Central Time(C.T) GMT-6 American Eastern Time(E.T) GMT-5 Atlantic Time GMT-4 Brazil GMT-3 Middle Atlantic Time GMT-2 © Copyright Qvis ®. All documentation rights reserved.
  • Page 62 Click save button, system prompts for rebooting to get all setup activated. After rebooting, open IE and input as below: http://(DDNS server IP)/(virtual directory name)/webtest.htm e.g.: http://10.6.2.85/DVR _DDNS/webtest.htm. Now you can open DDNSServer web search page. Figure 4-15 © Copyright Qvis ®. All documentation rights reserved.
  • Page 63 You can use a PC or FTP login tool to test setup is right or not. For example, you can login user ZHY to FTP://10.10.7.7 and then test it can modify or delete folder or not. See Figure 4-17. © Copyright Qvis ®. All documentation rights reserved.
  • Page 64 When interval value is 0, system uploads all corresponding files. After completed channel and weekday setup, you can set two periods for one each channel. © Copyright Qvis ®. All documentation rights reserved.

  • Page 65: Alarm

    Channel display: You can select to channel name or not when system is playback.  Resolution: There are four options: 1280×1024(default),1280×720,1024×768,800×600.  Display mode: you can select from the dropdown list: self-adaptive/VGA/TV.  Enable tour: activate tour function. © Copyright Qvis ®. All documentation rights reserved.
  • Page 66 In tour mode, you can see the following interface. On the right corner, right click mouse or click shift button, you can control the tour. There are two icons: stands for enabling window switch and stands for disabling window function. See Figure 4-22. © Copyright Qvis ®. All documentation rights reserved.

  • Page 67: Default

    After all the setups please click save button, system goes back to the previous menu. Warning! System menu color, language, time display mode, video format, IP address, user account will not maintain previous setup after selecting the default operation! © Copyright Qvis ®. All documentation rights reserved.

  • Page 68: Search

    Double click the advanced icon in the main window, the interface is shown as below. See Figure 4-24. There are total of nine advanced menu options: HDD management, Abnormity, Alarm Output, Manual Record, Account, Auto Maintenance, TV Adjust, Card Overlay and Video Matrix. Figure 4-24 © Copyright Qvis ®. All documentation rights reserved.

  • Page 69: Hdd Management

    Click alarm set button, the interface is shown as below. See Figure 4-26. (This interface is just like the abnormity setup). Please refer to chapter 5.5.2 for detailed information. Please highlight icon to select the corresponding function. Figure 4-26 © Copyright Qvis ®. All documentation rights reserved.

  • Page 70: Abnormity

     Send email: System can send out email to alert you when alarm occurs.  Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs. Figure 4-27 © Copyright Qvis ®. All documentation rights reserved.

  • Page 71: Alarm Output

    The user name and group name can consist of eight bytes. One name can only be used once. There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666, other users have administrator right. © Copyright Qvis ®. All documentation rights reserved.
  • Page 72 Please select the account from the dropdown list, input the old password and then input the new password twice. Click the Save button to confirm current modification. For the users of user account right, it can modify password of other users. © Copyright Qvis ®. All documentation rights reserved.
  • Page 73 PTZ, user account, system information view, alarm input/output setup, system setup, log view, clear log, upgrade system, control device and etc. The modify group interface is similar to the Figure 4-31. Figure 4-31 © Copyright Qvis ®. All documentation rights reserved.

  • Page 74: Auto Maintain

    Here you can set auto-reboot time and auto-delete old files setup. You can set to delete the files for the specified days. See Figure 4-33. You can select proper setup from dropdown list. After all the setups please click save button, system goes back to the previous menu. © Copyright Qvis ®. All documentation rights reserved.

  • Page 75: Tv Adjust

    After all the setups please click OK button, system goes back to the previous menu. Figure 4-34 4.5.8 Card Overlay The card overlay function is for financial areas. It includes Sniffer, information analysis and title overlay function. The Sniffer mode includes COM and network. © Copyright Qvis ®. All documentation rights reserved.
  • Page 76 There are two types: with or without the protocol according to client’s requirements. With the protocol: For ATM/POS with the protocol, you just need to set the source IP, destination IP (sometimes you need to input corresponding port number). © Copyright Qvis ®. All documentation rights reserved.
  • Page 77 Figure 4-37 Click Data button you can see an interface is shown as in Figure 4-38. Here you can set offset value, length, title according to your communication protocol and data package. . © Copyright Qvis ®. All documentation rights reserved.

  • Page 78: Config File Backup

    Figure 4-38 4.5.9 Config File Backup The configuration file backup interface is shown as below. See Figure 4-39. This function allows you to copy current system configuration to other devices. Figure 4-39 © Copyright Qvis ®. All documentation rights reserved.

  • Page 79: Information

    When HDD confliction occurs, you can check system time and HDD time are identical or not. If they are not identical, please go to General (Chapter 4.3.1) to adjust system time or go to HDD Management (Chapter 4.5.1) to format HDD and then reboot the DVR. © Copyright Qvis ®. All documentation rights reserved.

  • Page 80: Bps

    Here is for you to view current video data stream (KB/s) and occupied hard disk storage (MB/h). See Figure 4-42. Figure 4-42 4.6.3 Log Here is for you to view system log file. System lists the following information. See Figure 4-43. © Copyright Qvis ®. All documentation rights reserved.

  • Page 81: Version

    Figure 4-43 4.6.4 Version Here is for you to view some version information. See Figure 4-44.  Channel  Alarm in  Alarm out  System version:  Build Date Figure 4-44 © Copyright Qvis ®. All documentation rights reserved.

  • Page 82: Online Users

    Restart application: reboot DVR.  Shutdown: system shuts down and turns off power.  Restart system: system begins rebooting.  Switch user: you can use another account to log in. Figure 4-46 © Copyright Qvis ®. All documentation rights reserved.

  • Page 83: Auxiliary Menu

    , please click direction arrows (See Figure 6-3 ) to adjust PTZ position. There are X399H399H399H totally eight direction arrows. (Please note there are only four direction arrows in DVR front panel.) © Copyright Qvis ®. All documentation rights reserved.

  • Page 84: Intelligent Positioning Key

    Figure 5-4 Here is a sheet for you reference. Name Function Function Shortcut Function Function Shortcut  Zoom Near  ► Focus Near │ │   Iris Close Open © Copyright Qvis ®. All documentation rights reserved.

  • Page 85: Preset /Patrol / Pattern /Border Function

    , click page switch button, you can see an interface as in Figure 6-6 X403H403H403H Here you can activate the following functions:  Preset  Tour(Patrol)  Pattern  Auto scan  Auto pan  Flip  Page Switch Figure 5-6 © Copyright Qvis ®. All documentation rights reserved.

  • Page 86: Preset Setup

    , click patrol button. The interface is shown as in Figure 6-8 Input preset number and then add this preset to one patrol. Figure 5-8 5.2.4 Activate Patrol In Figure 6-6 , input patrol number in the No. blank and click patrol button © Copyright Qvis ®. All documentation rights reserved.

  • Page 87: Pattern Setup

    , use direction arrows to select camera left limit, and then please go to X422H 422H 422H Figure 6-10 and click left limit button. X423H 423H 423H Repeat the above procedures to set right limit. Figure 5-10 © Copyright Qvis ®. All documentation rights reserved.

  • Page 88: Activate Border Function

    , click page switch button, you can see an interface is shown as below. See Figure 6-11 . Here you can set auxiliary function. Click page switch button again, system goes back to Figure 6-2 Figure 5-11 © Copyright Qvis ®. All documentation rights reserved.

  • Page 89: Web Operation

    10.10.3.16 in IE address column. See Figure 6-1. Input your IP address here. Figure 6-1 System pops up warning information to ask you whether install webrec.cab control or not. Please click yes button. © Copyright Qvis ®. All documentation rights reserved.
  • Page 90 Please input your user name and password. Default factory name is admin and password is admin. Then you can select the login mode: LAN and WAN. Note: For security reasons, please modify your password after you first login. © Copyright Qvis ®. All documentation rights reserved.

  • Page 91: Lan Mode

    Section 2: There are channel number and one button: Start all. Start all button is to enable/disable all-channel real-time monitor. Click it the button becomes yellow. See Figure 6-4. Figure 6-4 Please refer to Figure 6-5 for main stream and extra stream switch information. © Copyright Qvis ®. All documentation rights reserved.
  • Page 92 Figure 6-6  Section 4: Instant record button. Click it, the button becomes yellow and system begins manual record. See Figure 6-7. Click it again, system restores previous record mode.. Figure 6-7 © Copyright Qvis ®. All documentation rights reserved.
  • Page 93  Section 7: PTZ operation panel. Please refer to chapter 6.5 for detailed information.  Section 8: Image setup and alarm setup. Please refer to chapter 6.6 for detailed information. Figure 6-9 © Copyright Qvis ®. All documentation rights reserved.

  • Page 94: Real-Time Monitor

    Before PTZ operation, please make sure you have properly set PTZ protocol. There are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key. © Copyright Qvis ®. All documentation rights reserved.
  • Page 95 You can select one option and then click AUX on or AUX off button. You can turn on or turn off the light/wiper. Light and wiper 3D Intelligent Positioning You can click this icon to display or hide the PTZ control platform. Figure 6-12 © Copyright Qvis ®. All documentation rights reserved.

  • Page 96: Image/Relay-Out

    6.6.3 Multiple-channel preview System allows you to preview several channels on one channel. It supports 1/4/8/9-window. See Figure 6-15. Please note only the product of this icon can support current function. Figure 6-15 © Copyright Qvis ®. All documentation rights reserved.

  • Page 97: Wan Login

    In the WAN mode, system opens the main stream of the first channel to monitor by default. The open/close button on the left pane is null. You can select different channel and different monitor mode at the bottom of the interface. See Figure 6-17. © Copyright Qvis ®. All documentation rights reserved.
  • Page 98 For bandwidth consideration, system can not support monitor and playback at the same time. System auto closes monitor or playback interface when you are searching setup in the configuration interface. It is to enhance search speed. © Copyright Qvis ®. All documentation rights reserved.

  • Page 99: Setup

    Please note the video may become hazy if the value is too high. The value ranges from 0 to 100.The recommended value ranges from 40 to 60. © Copyright Qvis ®. All documentation rights reserved.

  • Page 100: Video And Audio

    6.8.1.2 Video and Audio Encode The encode interface is shown as below. See Figure 6-19: Figure 6-19 Please refer to the following sheet for detailed information: © Copyright Qvis ®. All documentation rights reserved.
  • Page 101 Watermark enable Here you can select watermark bit stream, watermark mode and watermark character. Default character is DigitalCCTV. The max length is 85-digit. The character can only include number, character and underline. © Copyright Qvis ®. All documentation rights reserved.
  • Page 102 It is to set the image quality. There are six levels. Quality It is to set snapshot frequency. The value ranges from 1s to 7s. Interval Click it; you can copy current channel setup to other Copy channel(s). © Copyright Qvis ®. All documentation rights reserved.

  • Page 103: Video Overlay

    You can enable this function so that system overlays channel information in video window. You can use the mouse to drag the channel title position. You can view channel title on the live video of the WEB or the playback video. © Copyright Qvis ®. All documentation rights reserved.
  • Page 104 C:\PictureDownload and C:\RecordDownload. Please click the Save button to save current setup. Figure 6-22 6.8.1.3 Channel Name Here you can set channel name. See Figure 6-23. Figure 6-23 © Copyright Qvis ®. All documentation rights reserved.

  • Page 105: Network

    Please use the keyboard to input the corresponding number to modify the IP address and then set the corresponding subnet mask and the default gateway. Preferred DNS DNS IP address. Alternate DNS Alternate DNS IP address. © Copyright Qvis ®. All documentation rights reserved.

  • Page 106: Connection

    The default value is 37778. You can input the actual port UDP port number if necessary. HTTP port The default value is 80. You can input the actual port number if necessary. RTSP port The default value is 554. © Copyright Qvis ®. All documentation rights reserved.

  • Page 107: Wifi

    Double click a name to connect to it. Click Refresh button, you can view latest connection status. 6.8.2.4  CDMA/GPRS The CDMA/GPRS interface is shown as in Figure 6-27. Figure 6-27 © Copyright Qvis ®. All documentation rights reserved.
  • Page 108 3G: Mobile The mobile setup interface is shown as in Figure 6-29. Here you can activate or turn off the 3G connected phone/mobile phone, or the phone you set to get alarm message. © Copyright Qvis ®. All documentation rights reserved.

  • Page 109: Pppoe

    Note: you need to use previous IP address in the LAN to login the device. Please go to the IP address item to via the device current device information. You can access the client-end via this new address. Figure 6-30 © Copyright Qvis ®. All documentation rights reserved.
  • Page 110 The password you input to log in the server. Update period Device sends out alive signal to the server regularly. You can set interval value between the device and DDNS server here. © Copyright Qvis ®. All documentation rights reserved.

  • Page 111: Ip Filter

    The IP filter interface is shown as in Figure 6-32. After you enabled trusted sites function, only the IP listed below can access current DVR. If you enable blocked sites function, the following listed IP addresses can not access current DVR. © Copyright Qvis ®. All documentation rights reserved.
  • Page 112 Figure 6-32 6.8.2.8 Email The email interface is shown as in Figure 6-33. Figure 6-33 © Copyright Qvis ®. All documentation rights reserved.
  • Page 113 6.8.2.9 UPnP It allows you to establish the mapping relationship between the LAN and the public network. Here you can also add, modify or remove UPnP item. See Figure 6-34. © Copyright Qvis ®. All documentation rights reserved.
  • Page 114 6.8.2.10 SNMP The SNMP interface is shown as in Figure 6-35. The SNMP allows the communication between the network management work station software and the proxy of the managed device. Figure 6-35 © Copyright Qvis ®. All documentation rights reserved.
  • Page 115 CPU load. The source host can just send out one data to transit. This function also depends on the relationship of the group member and group of the outer. © Copyright Qvis ®. All documentation rights reserved.
  • Page 116 Before you use alarm centre, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data. Figure 6-37 © Copyright Qvis ®. All documentation rights reserved.

  • Page 117: Event

    6.8.3 Event 6.8.3.1 Video detect  Motion Detect The motion detect interface is shown as in Figure 6-38. Figure 6-38 Figure 6-39 © Copyright Qvis ®. All documentation rights reserved.
  • Page 118 There are six levels. The sixth level has the highest sensitivity. Region: If you select motion detection type, you can click this button to set motion detection zone. The interface is shown as in © Copyright Qvis ®. All documentation rights reserved.
  • Page 119  Video Dectect: Video Loss The video loss interface is shown as in Figure 6-42. After analysis video, system can generate a video loss alarm when the detected moving signal reached the sensitivity you set here. © Copyright Qvis ®. All documentation rights reserved.
  • Page 120 After analysis video, system can generate a camera masking alarm when the detected moving signal reached the sensitivity you set here. For detailed setups, please refer to chapter 6.8.3.1 motion-detect for detailed information. Figure 6-43 © Copyright Qvis ®. All documentation rights reserved.

  • Page 121: Local Alarm

    Before operation, please make sure you have properly connected alarm devices such as buzzer. The input mode includes local alarm and network alarm. The local alarm interface is shown as in Figure 6-44. Figure 6-44 Figure 6-45 © Copyright Qvis ®. All documentation rights reserved.
  • Page 122 Buzzer Check the box here to enable this function. The buzzer beeps when an alarm occurs. Alarm upload System can upload the alarm signal to the centre (Including alarm centre. © Copyright Qvis ®. All documentation rights reserved.
  • Page 123 The network alarm interface is shown as in Figure 6-47. Network alarm refers to the alarm signal from the network. System does not anti-dither and sensor type setup. For reset setups, please refer to chapter 6.8.3.2. Figure 6-47 © Copyright Qvis ®. All documentation rights reserved.
  • Page 124 Here you can set alarm output channel mode. See Figure 6-48. Figure 6-48 6.8.3.3 Abnormity It includes six statuses: No disk, disk error, net disconnection, IP conflict and MAC conflict. See Figure 6-49 through Figure 6-54. Figure 6-49 Figure 6-50 © Copyright Qvis ®. All documentation rights reserved.
  • Page 125 Figure 6-51 Figure 6-52 Figure 6-53 Figure 6-54 © Copyright Qvis ®. All documentation rights reserved.

  • Page 126: Storage

    You can view the current time period setup from the color bar.  Green color stands for the general record/snapshot.  Yellow color stands for the motion detect record/snapshot..  Red color stands for the alarm record/snapshot. © Copyright Qvis ®. All documentation rights reserved.
  • Page 127 Figure 6-55 Figure 6-56 Figure 6-57 © Copyright Qvis ®. All documentation rights reserved.
  • Page 128 5/6/7. If you wan to save current setup of channel 1 to all channels, you can click the first box “ALL”. Click the OK button to save current copy setup. Click the OK button in the Encode interface, the copy function succeeded. © Copyright Qvis ®. All documentation rights reserved.
  • Page 129 Here is for you to set HDD group. See Figure 6-60. Figure 6-60  Storage: HDD Channel The HDD channel interface is shown as in Figure 6-61. Here you can set channel group. Figure 6-61 © Copyright Qvis ®. All documentation rights reserved.
  • Page 130 The FTP function is on if you check the Enable box here. When network is offline or malfunction, system can save record or picture to HDD. Figure 6-62 6.8.4.3 Record control The record control interface is shown as in Figure 6-63. Figure 6-63 © Copyright Qvis ®. All documentation rights reserved.

  • Page 131: System

    Start all/ channels record. stop all 6.8.5 System 6.8.5.1 General  General The general interface includes General, date/time and holiday setup. The general interface is shown as in Figure 6-64. Figure 6-64 © Copyright Qvis ®. All documentation rights reserved.
  • Page 132 Here is for you to specify record duration. The value ranges from 1 Pack to 120 minutes. Default value is 60 minutes. duration  General: Date and time The date and time interface is shown as in Figure 6-65 Figure 6-65 © Copyright Qvis ®. All documentation rights reserved.
  • Page 133 It is to set the sync periods between the device and the time server. Interval  General: Holiday Setup Holiday setup interface is shown as in Figure 6-66. Here you can check the box here to enable this function and then set. Figure 6-66 © Copyright Qvis ®. All documentation rights reserved.
  • Page 134 Here you can input the user name and password and then select one group for current user. Please note the user rights shall not exceed the group right setup. © Copyright Qvis ®. All documentation rights reserved.
  • Page 135 Please click the OK button to save. Please note, the password ranges from 1-digit to 6-digit. It shall include the number only. For the user of the account rights, he can modify the password of other users. © Copyright Qvis ®. All documentation rights reserved.
  • Page 136 Figure 6-69  Account: Group The group management interface can add/remove group, modify group password and etc. The interface is shown as in Figure 6-70. Figure 6-70 © Copyright Qvis ®. All documentation rights reserved.
  • Page 137 PTZ control and etc. Figure 6-71 Modify group Click the modify group button, you can see an interface is shown as in Figure 6-72. Here you can modify group information such as remarks and rights. © Copyright Qvis ®. All documentation rights reserved.
  • Page 138 Figure 6-72 6.8.5.3 Display: GUI Display interface includes GUI, TV adjust, Tour and video matrix. Here you can set background color and transparency level. See Figure 6-73. Figure 6-73 © Copyright Qvis ®. All documentation rights reserved.
  • Page 139 Check the box; you can optimize the margin of the preview video. Image enhance  Display: TV Adjust It is to set TV output region. See Figure 6-74. Figure 6-74 © Copyright Qvis ®. All documentation rights reserved.
  • Page 140 Here you can set window mode and channel group. System can Split support 1/4/8/9/16/25/36-window according to device channel amount. Here you can set motion detect tour/alarm tour window mode. Motion System supports 1/8-window now. tour/Alarm tour © Copyright Qvis ®. All documentation rights reserved.
  • Page 141 Figure 6-76 6.8.5.4 Default The default setup interface is shown as in Figure 6-77. Here you can select Channel/Network/Event/Storage/System. Or you can check the All box to select all items. Figure 6-77 © Copyright Qvis ®. All documentation rights reserved.
  • Page 142 Here you can select auto reboot and auto delete old files interval from the dropdown list. If you want to use the auto delete old files function, you need to set the file period. Figure 6-79 © Copyright Qvis ®. All documentation rights reserved.
  • Page 143 *.bin. During the upgrade process, do not unplug the power cable, network cable, or shutdown the device. Important: Improper upgrade program may result in device malfunction! Figure 6-80 6.8.5.8 RS232 The RS232 interface is shown as in Figure 6-81. Figure 6-81 © Copyright Qvis ®. All documentation rights reserved.
  • Page 144  Decoder A (B) line connects with DVR A (B) line. Click Save button after you complete setup, you can go back to the monitor interface to control speed dome. Figure 6-82 © Copyright Qvis ®. All documentation rights reserved.

  • Page 145: Advanced

    Overlay mode: There are two options: preview and encode. Preview means overlay the card number in the local monitor video. Encode means overlay the card number in the record file.  Overlay Position: Here you can select the proper overlay position from the dropdown list. © Copyright Qvis ®. All documentation rights reserved.
  • Page 146 Usually you do not need to set source port and target port. There are total four group IP. The record channel applies to one group (optional) only. Six frame ID groups verification can guarantee information validity and legal. © Copyright Qvis ®. All documentation rights reserved.

  • Page 147: Information

    The version interface is shown as in Figure 6-86. Here you can view system hardware features, software version, release date and etc. Please note the following information is for reference only. Figure 6-86 © Copyright Qvis ®. All documentation rights reserved.
  • Page 148 You can click this button to delete all displayed log files. Please note system does not support clear by type. You can click this button to backup log files to current PC. Backup © Copyright Qvis ®. All documentation rights reserved.

  • Page 149: Search

    You can click the date on the right pane to select the date. The green highlighted date is system current date and the blue highlighted date means it has record files. Figure 6-89 © Copyright Qvis ®. All documentation rights reserved.
  • Page 150 Select the file(s) you want to download and then click download button, system pops up a dialogue box shown as in Figure 6-91, then you can specify file name and path to download the file(s) to your local pc. Figure 6-91 © Copyright Qvis ®. All documentation rights reserved.
  • Page 151 See Figure 6-93. Please select file(s) from the list and then Click Start backup button. Please refer to chapter to set device download path. Figure 6-93 © Copyright Qvis ®. All documentation rights reserved.

  • Page 152: Alarm

    Alarm Play alarm System sends out alarm sound when an alarm Sound sound occurs. You can specify as you wish. Sound path Here you can specify alarm sound file. © Copyright Qvis ®. All documentation rights reserved.

  • Page 153: Log Out

    6.12 Un-install Web Control You can use web un-install tool “uninstall web.bat” to un-install web control. Please note, before you un-installation, please close all web pages, otherwise the un- installation might result in error. © Copyright Qvis ®. All documentation rights reserved.

  • Page 154: Faq

    Brightness is set to 0. Please restore factory default setup.  There is no video input signal or it is too weak.  Check privacy mask setup or your screen saver.  DVR hardware malfunctions. © Copyright Qvis ®. All documentation rights reserved.
  • Page 155 9. There is audio when monitor but there is no audio when system playback. These are the possiblilities:  Setup is not correct. Please enable audio function  Corresponding channel has no video input. Playback is not continuous when the screen is blue. © Copyright Qvis ®. All documentation rights reserved.
  • Page 156 No dx8.1 or higher. Please upgrade display card driver.  Network connection error.  Network setup error.  Password or user name is invalid.  Client-end is not compatible with DVR program. © Copyright Qvis ®. All documentation rights reserved.
  • Page 157 Alarm setup is not correct.  Alarm output has been opened manually.  Input device error or connection is not correct.  Some program versions may have this problem. Please upgrade your system. © Copyright Qvis ®. All documentation rights reserved.
  • Page 158 These are the possiblilities:  Close extra stream record function.  Close snapshot function.  Reduce monitor channel amount of the WEB.  Close FTP upload function. © Copyright Qvis ®. All documentation rights reserved.
  • Page 159 Otherwise it may result in HDD malfunction.  Please make sure the device is away from the direct sunlight or other heating sources. Please keep the sound ventilation.  Please check and maintain the device regularly. © Copyright Qvis ®. All documentation rights reserved.
  • Page 160 Alternatively scan this QR code with your smart phone to be directed instantly to our website: Download our mobile apps to remotely operate your DVR on the move: iPhone iPad Android Android Tablet © Copyright Qvis ®. All documentation rights reserved.

Table of Contents