Qvis I-ZEUS-HYBRID1 User Manual page 186

Please refer to the following sheet for detailed information:
Parameter Function
Select the corresponding dome protocol.
Protocol
Default setup is console.
Select the baud rate.
Baud Rate
Default setup is 115200.
Data Bit The value ranges from 5 to 8.
Default setup is 8.
There are two options: 1/2.
Stop bit
Default setup is 1.
Parity There are five options: none/odd/even/space/mark.
Default setup is none.
 PTZ
The PTZ interface is shown as in Figure 7-82.
Before setup, please check the following connections are right:

PTZ and decoder connection is right. Decoder address setup is right.

Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to control
speed dome.
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-82
177