Table of Contents
Advertisement
Display: Tour
The tour interface is shown as in Figure 7-75. Here you can set tour interval, split mode, motion
detect tour and alarm tour mode.
Please refer to the following sheet for detailed information:
Parameter
Function
Check the box here to enable tour function.
Enable tour
Here is for you to adjust transparency. The value ranges from 5 to
Interval
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
Split
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
Motion
System supports 1/8-window now.
tour/Alarm
tour
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-75
173
Advertisement
Table of Contents
