Table of Contents
Advertisement
On the navigation bar, you will see the Favorites shortcut menu. You can select from the dropdown
list. Click View 1, you can see the channel(s) you saved on the Favorites folder. See Figure 5-13.
Zero-Channel Encoding: Click Setup button, you can go to the following interface shown in
Figure 5-14. Here you can enable and set the zero-channel encoding function so that you can
view several video sources in one channel.
Enable: This function is disabled by default. Check the box here to enable this function so
that you can control the zero-channel encoding function at the WEB.
Compression: System default setup is H.264. You can set according to device capability.
Resolution
Frame rate
Bit Rate
Save: Click the Save button to save current setup. If this function is disabled, you can not
operate zero-channel encoding function at the WEB, the video is black or null even you
operate when the function is disabled. After you enabled this function, login to the Web and
you can select zero-channel encoding mode at the right corner of the interface
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-13
. Select a mode; you can view the local preview video.
Figure 5-14
95
Advertisement
Table of Contents
