Qvis I-ZEUS-HYBRID1 User Manual page 165

Parameter
Send Email
Tour
PTZ Activation
 Alarm: Net Alarm
The network alarm interface is shown as in Figure 7-47. Network alarm refers to the alarm signal
from the network. System does not anti-dither and sensor type setup. For reset setups, please refer
to chapter .
© Copyright Qvis ®. All documentation rights reserved.
Function
If you enabled this function, System can send out an
email to alert you when an alarm occurs.
You need to check the box here to enable this function.
System begins 1-wiindow or multiple-window tour display
among the channel(s) you set to record when an alarm
occurs.
Please go to chapter Error! Reference source not
found. to set tour interval and tour mode.
Here you can set PTZ movement when alarm occurs.
Such as go to preset X.
Figure 7-47
156