Table of Contents
Advertisement
Important:
When you are setting up the router's external port please use 1024~5000 port. Do not use
well-known port 1~255 and the system port 256~1023 because you will cause system
conflicts.
For the TCP and UDP, please make sure the internal port and external port are the same to
guarantee the proper data transmission.
WIFI Setting
You can view the WIFI connection status in the Network Setting interface. See Figure 5-35.
You can view current connection status and IP address if there is a connection.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-33
Figure 5-34
83
Advertisement
Table of Contents
