Qvis I-ZEUS-HYBRID1 User Manual page 40




9 Time bar


 The option includes: 24H, 12H, 1H and 30M. The smaller the unit,
Time bar
10
 The time bar is begins with 0 o'clock when you are setting the
unit
 Select the file(s) you want to backup from the file list. You can check
11 Backup
 Check the file again, you can cancel current selection. System can
 After you clip on record file, click Backup button to save it.
 For one device, if there is a backup in process, you can not start a


12 Clip


Please note: System supports a maximum of 1024 backup files. You
cannot perform clip operation if there any of the files have been
checked in the file list.
© Copyright Qvis ®. All documentation rights reserved.
Mark button.
Please note this function is for some series product only. Please
make sure there is a mark button in the playback control pane.
You can refer to chapter 4.4.4 for detailed information.
This is to display the record type and its period in current search
criteria.
In 4-window playback mode, there are four corresponding time bars.
In the other playback mode, there is only one time bar.
Use the mouse to click one point of the color zone in the time bar,
system will begin playback.
The time bar is begins with 0 o'clock when you are setting the
configuration. The time bar zooms in to the period of the current
playback time when you are playing the file.
The green color stands for the regular recorded file. The red color
stands for the external alarm recorded file. The yellow stands for the
motion detect recorded file.
the larger the zoom rate. You can accurately set the time in the time
bar to playback the record.
configuration. The time bar zooms in to the period of the current
playback time when you are playing the file.
from the list. Then click the backup button, you will then see the
backup menu. System supports customised path setup. After
selecting or create new folder, click the Start button to begin the
backup operation. The record file(s) will be saved in the specified
folder.
display up to a maximum of 32 files from one channel.
new backup operation.
This is to edit files. Please play the file you want to edit and then
click this button when you want to start editing. You can see the
corresponding slide bars such as
corresponding channel. You can adjust the slide bar or input the
accurate time to set the file end time.
After you set, you can click the Clip button again to edit the second
period. You will see that the slide bar will restore its previous
position.
Click the Backup button after the clip, you will be able to save current
contents in a new file.
You can clip either one channel or multiple-channels. The multiple-
channels click operation is similar to the one-channel operation.
or in the time bar of the
31