Table of Contents
Advertisement
Snapshot
The snapshot interface is shown as in Figure 7-20.
Please refer to the following sheet for detailed information:
Parameter
Snapshot type
Image size
Quality
Interval
Copy
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-20
Function
There are two modes: Timing (schedule) and Event
(activation).
Timing snapshot is valid during the specified period you
set.
Activation snapshot only is valid when motion detect alarm,
camera masking alarm or local activation alarm occurs.
It is the same with the resolution of the main stream.
It is to set the image quality. There are six levels.
It is to set snapshot frequency. The value ranges from 1s to 7s.
Click it; you can copy current channel setup to other
channel(s).
135
Advertisement
Table of Contents
