Table of Contents
Advertisement
Daily Maintenance
Please use the brush to clean the board, socket connector and the chassis regularly.
The device should be soundly earthed in case there is audio/video disturbance. Keep the
device away from the static voltage or induced voltage.
Please unplug the power cable before you remove the audio/video signal cable, RS232 or
RS485 cable.
Do not connect the TV to the local video output port (VOUT).It may result in video output circuit.
Always shut down the device properly. Please use the shutdown function in the menu, or you
can press the power button in the rear pane for at least three seconds to shut down the device.
Otherwise it may result in HDD malfunction.
Please make sure the device is away from the direct sunlight or other heating sources. Please
keep the sound ventilation.
Please check and maintain the device regularly.
© Copyright Qvis ®. All documentation rights reserved.
197
Advertisement
Table of Contents
