Qvis I-ZEUS-HYBRID1 User Manual page 82

need to go to Detect interface (Main menu->Setting-Detect) to set snapshot activation
operation.
o
Image size: Here you can set snapshot picture size.
o
Image quality: Here you can set snapshot quality. The value ranges from 1 to 6.
o
Snapshot frequency: This is for you to set timing (schedule) snapshot interval. The
value ranges from 1-7 picture(s) per second.

Overlay: Click overlay button, you will see the interface shown in Figure 5-21.

Copy：After you complete the setup, you can click Copy button to copy current setup to
other channel(s). You can see an interface is shown as in Figure 5-22. You will see current
channel number is grey. Please check the number to select the channel or you can check the
box ALL. Please click the OK button in Figure 5-22 and Figure 5-19 respectively to complete
the setup.
Please highlight icon
© Copyright Qvis ®. All documentation rights reserved.
to select the corresponding function.
Figure 5-19
Figure 5-20
73