Table of Contents
Advertisement
Please refer to the following sheet for detailed information:
Parameter
Function
This is to set device name.
Device ID
Device No.
This is device channel number.
Language
You can select the language from the dropdown list.
Please note the device needs to reboot to get the modification
activated.
Video
This is to display video standard such as PAL.
Standard
Here is for you to select working mode when hard disk is full. There
HDD full
are two options: stop recording or rewrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no
empty, then system stops recording, If the current HDD is full and
then next HDD is not empty, then system overwrites the previous
files.
Here is for you to specify record duration. The value ranges from 1
Pack
to 120 minutes. Default value is 60 minutes.
duration
General: Date and time
The date and time interface is shown as in Figure 7-65
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-65
165
Advertisement
Table of Contents
