Qvis I-ZEUS-HYBRID1 User Manual page 156


In the Windows OS, From Start->Control Panel->Add or remove programs. Click the
"Add/Remove Windows Components" and then select the "Network Services" from the
Windows Components Wizard.

Click the Details button and then check the "Internet Gateway Device Discovery and Control
client" and "UPnP User Interface". Please click OK to begin installation.

Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the DVR can auto
detect it via the "My Network Places"

SNMP
The SNMP interface is shown as in Figure 7-35.
The SNMP allows the communication between the network management work station software and
the proxy of the managed device.
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-34
Figure 7-35
147