Qvis I-ZEUS-HYBRID1 User Manual page 103


Tour setup: Here you can activate the tour function. Click the Setup button and you will see
an interface shown as in Figure 5-52.
o
Enable tour: Highlight box here to enable this function.
o
Interval: System supports 1/4/8/9/16-window tour. Input proper interval value here. The
value ranges from 5-120 seconds. It is for schedule tour/alarm/motion detect tour.
o
Split: You can select window split mode from the dropdown list.
o
Channel group: It is for you to view channel names under current window split mode.
You can add/delete channel here. Double click one item, you can change channel group
setup to edit it. Now system max supports 32 channels.
o
Add: Under specified window split mode, click it to add channel group.
o
Delete: Click it to remove selected channel group.
o
Move up: Click it to move current selected channel up.
o
Move down: Click it to move current selected channel down.
o
Default: Click it to restore default setup.
 Favorites: This allows you to set and save a favorites preview setup. You can select different
window display modes and then select corresponding channel(s). Please note for one mode,
one channel can only be selected once. Click Setup button, you can see an interface shown in
Figure 5-12.
o
Current setup: Click it you get channel setup information of current preview interface. For
example: If you window split mode is 4 and channel setup includes channel 1/2/3/4, you will
see 4 from the split dropdown list and then see channels 1/2/3/4 at the middle of the
interface.
o
View now: Click this to activate current setup. You will see the current setup effect on the
screen right now.
o
Default: This restores factory default setup. For example, 1-window mode, it is to display
channel 1 and 4-window mode, it is display channel 1/2/3/4.
o
Save: Click this to save current setup to Favorites folder. Otherwise, you will not find
current setup in the Favorites.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-12
94