Table of Contents
Advertisement
Important: The window display mode and the channel number are by default. For example,
for the 16-channel, the max window split mode is 16.
Multiple-channel monitor, system adopts extra stream to monitor by default. Double click one
channel, system switches to single channel and system uses main stream to monitor. You can view
there are two icons at the left top corner of the channel number for you reference. M stands for main
stream. S stands for sub stream (extra stream).
If you login via the WAN mode, system does not support alarm activation to open the video function
in the Alarm setup interface.
Important
For multiple-channel monitor mode, system adopts extra stream to monitor by default. You can
not modify manually. All channels are trying to synchronize. Please note the synchronization
effect still depends on your network environments.
For bandwidth consideration, system can not support monitor and playback at the same time.
System auto closes monitor or playback interface when you are searching setup in the
configuration interface. It is to enhance search speed.
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-17
131
Advertisement
Table of Contents
