Click alarm set button, the interface is shown as below. See Figure 5-63. (This interface is just like
the abnormity setup).
Please highlight icon
For the HDD group setup operation, please note:
Each channel's records footage can be stored into the specified HDD Group.
Each HDD Group is corresponds to several hard disks, while one hard disk is only included
in one HDD Group.
Each channel only corresponds with one HDD Group, while one HDD Group can store
records from several channels.
HDD Group is only available for read-write HDD and self-defined disks, other types of hard
disks cannot be set as HDD Group.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-62
to select the corresponding function.
Figure 5-63
101