Table of Contents
Advertisement
Quick Setup
This function allows you to copy one channel setup to another. After setting in channel 1, click the
Copy button, you will see the interface as shown in Figure 4-13. As you can see the current channel
name is grey (channel 1). Now you can select the channel you want to paste, which is shown as
channesl 5/6/7. If you want to save the current setup of channel 1 to all channels, you can click the
first box "ALL". Click the OK button to save current copy setup. Click the OK button in the Record
interface, the copy function will be completed.
Note: if you select ALL in Figure 4-13, the record setup of all channels are the same and the Copy
button becomes hidden.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-19
Figure 4-12
Figure 4-13
37
Advertisement
Table of Contents
