Interpreting Error Messages - Nokia IPSO 4.0 Reference Manual

6
4. Click Save to make your changes permanent.
Configuring Location and Contact Information
The settings for location and contact information provide information to the management system
about where your device is located and who to contact about it.
Set the location and contact strings when you perform the initial configuration for SNMP on
your system.
To configure location and contact information
1. Choose SNMP under Configuration in the tree view.
2. In the SNMP Location String text field, enter the actual location of the device. Click Apply.
3. In the SNMP Contact String text field, enter the name of department or person who has
administrative responsibility for the device.
4. Click Apply.
5. Click Save to make your changes permanent.

Interpreting Error Messages

This section lists and explains certain common error status values that can appear in SNMP
messages. Within the PDU, the third field can include an error-status integer that refers to a
specific problem. The integer zero (0) means that no errors were detected. When the error field is
anything other than 0, the next field includes an error-index value that identifies the variable, or
object, in the variable-bindings list that caused the error.
The following table lists the error status codes and their corresponding meanings.
Error status code Meaning
0
1
2
3
4
5
6
7
8
260
Error status code
noError 10
tooBig 11
NoSuchName 12
BadValue 13
ReadOnly 14
genError 15
noAccess 16
wrongType 17
wrongLength 18
Nokia Network Voyager for IPSO 4.0 Reference Guide
Meaning
wrongValue
noCreation
inconsistentValue
resourceUnavailable
commitFailed
undoFailed
authorizationError
notWritable
inconsistentName