Changing The Local Preference Value Example - Nokia IPSO 4.0 Reference Manual

5. Enter 100 in MED edit box next to the Enable redistribute bgp routes to AS100 field.
6. Enter necessary information for route redistribution according to the
Discriminator
7. Click Save to make your changes permanent.
Setting an MED value along with route redistribution policy allows Nokia Platform D to
redistribute all routes to AS100 with an MED value set to 100.
Note
Setting an MED value along with route redistribution overwrites the MED value for the
external BGP peer for Nokia Platform D.
Verification
To verify that you configured BGP MED values correctly, run the following commands in iclid.
show route
show bgp neighbor <peerid> advertised
show route bgp metrics
For more information on these commands, see

Changing the Local Preference Value Example

This example shows how to set up two IBGP peers, and how to configure routes learned using
Nokia Platform A to have a higher local preference value over Nokia Platform B (which has a
default local preference value of 100).
1. Configure the interface as in
2. Click IGBP under Configuration > Routing Configuration in the tree view.
3. Enter
Nokia Network Voyager for IPSO 4.0 Reference Guide
Example"; then click Apply.
Nokia
Platform A
20.10.5.1/24
20.10.10.2/24
IBGP
20.10.10.1/24
20.10.5.1/24
Nokia
Platform B
in the AS number text box; then click Apply.
100
"Viewing Routing Protocol Information."
AS100
20.10.5.2/24
EBGP
20.10.15.2/24
EBGP
"Ethernet Interfaces."
"BGP Multi Exit
AS676
Nokia
Platform C
AS342
Nokia
Platform D
00332
421