Nokia IPSO 4.0 Reference Manual page 63

9. Click Incoming.
10. Select CHAP as the authentication method in the Authentication table.
11. Enter User in the Name text box under the From Remote Host section in the Authentication
table.
12. Enter Password in the Password text box under the From Remote Host section in the
Authentication table.
13. Click Apply.
14. Click the Incoming Numbers link.
15. Enter
16. Click Apply.
17. Click Save.
Sample Call Traces
Sample traces for call setup between the Nokia IP Security platform follow. The traces were
produced by issuing the following command on each device: "
Traffic was generated by doing a "
Note
To display the negotiated PPP values, run the tcpdump command with the -v switch.
Nokia Network Voyager for IPSO 4.0 Reference Guide
in the Number text box under the Add Incoming Call Information section.
384000
" on the Nokia IP330.
ping 206.226.15.1
tcpdump -i <interface>
."
63