Ipsec Transport Rule Example - Nokia IPSO 4.0 Reference Manual

8
Configure Nokia Platform 2
Now set up network application platform 2 (Nokia Platform 2). Perform the same steps that you
performed to configure Nokia Platform 1, with the following changes.
1. Step 18; enter
2. Step 19; enter
3. Step 24; select
4. Step 25; select

IPSec Transport Rule Example

The following procedure tells you how to configure a sample IPSec authentication connection.
The following figure shows the network configuration for this example.
To configure Nokia Platform 1 (IPSO)
1. Click IPSec under Configuration > Security and Access in the tree view of the network
application platform 1 (Nokia Platform 1, IPSO).
2. Under the Proposals table, enter ah-md5 as a name for a new proposal in the New Proposal
text box.
3. In the Type field, click AH.
4. Select MD5 from the Authentication Alg drop-down list and None from the Encryption Alg
drop-down list.
Click Apply.
5. In the Filters table, enter local as a new filter name in the New Filter text box.
Enter
Click Apply.
The new entry appears in the Filters table.
6. In the Filters table, enter
Enter
Click Apply.
346
192.68.26.74
192.68.26.65
_B from the Source Filters drop-down list.
SITE
_A from the Destination Filters drop-down list.
SITE
Nokia Platform 1
(IPSO)
eth-s1p3c0
192.68.26.65/30
in the Address text box and 32 in the Mask Length text box.
192.68.26.65
remote
in the Address text box and 32 in the Mask Length text box.
192.68.26.74
in the Local Address text box.
in the Remote Address text box.
Internet
as a new filter name in the New Filter text box.
Nokia Network Voyager for IPSO 4.0 Reference Guide
PC 1
192.68.26.74/30
00130