Nokia, Nokia Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.
PC Personal Information Manager (PIM) application for use with Nokia PC Sync Note: Nokia Content Copier (a component of Nokia PC Suite) supports a variety of Nokia phones, some of which make their connection to a PC via serial cable. For a list of compatible phones and connection methods, please see “Compatible phones”...
There must be no obstructions between the two devices and the IR ports of the two devices have to be pointing at each other. Your Nokia phone is a Class 1 Laser Product. Enable infrared communications It is not necessary to enable infrared communications for users of Windows Millennium Edition (ME) and Windows 2000 prior to using this feature.
2 Install Nokia PC Suite 4.1 Nokia PC Suite 4.1 is a collection of powerful tools that you can use to manage your phone’s features and data. PC Suite consists of the following components: • Nokia Content Copier allows you to copy data between two Nokia phones, to back up your phone’s data to your PC, and erase data from your phone.
Click Start, point to Settings, then click Control Panel. Double-click Add/Remove Programs. Scroll through the list of installed applications, then click Nokia PC Suite 4.1. Click the Add/Remove button. Click Remove from the Nokia PC Suite Setup window, then click Next.
You can also use this application to transfer information between other 3320/3360 phones in your family. The following table shows a list of phones compatible with Nokia Content Copier (other than 3320 and 3360), as well as the method of connection to the PC:...
Important: Windows Millennium Edition (ME) users have no way of disabling the Plug and Play software installation of your Nokia phones as a wireless modem. Windows ME launches the Add New Hardware Wizard immediately upon detection of your phone via Infrared. Before proceding with any Content Copier tasks, please click the Add New Hardware Wizard’s Cancel button.
Nokia Content Copier log When you have successfully completed one of the Nokia Content Copier tasks, the Finish screen is displayed along with a log of the tasks that were just performed. At the Finish screen, you have the following options: •...
4 Nokia PC Composer Nokia PC Composer allows you to create new ringing tones for your 3320 or 3360 phone. Once you create a new ringing tone, you can transfer it to your phone via infrared. PC Composer also allows you to open Standard MIDI files (type I), edit them, and convert them to ringing tones. You can save your ringing tones as either .mid (MIDI) or .ott (ringing tone) file formats on your PC’s hard drive.
Bar to monitor the length of your new ringing tone. CREATE A NEW RINGING TONE Launch Nokia PC Composer (click Start, point to Programs, point to Nokia PC Suite, then click Nokia PC Composer). Click the appropriate note (or rest) button.
• RINGING TONES FROM MIDI FILES Nokia PC Composer allows you to open Standard MIDI files, then convert the data to ringing tone format. Now you can carry your favorite PC MIDI file as a ringing tone in your phone.
For more information on saving, please refer to “Save your new ringing tone” on page 11. For more information on sending a ringing tone to your phone, please refer to “Transfer via infrared” on page 12. [ 13 ] Nokia PC Composer...
Warning: To avoid any potential loss of data, you should not make or receive calls while synchronizing data between the phone and your PC. Nokia PC Sync cannot be used while a data call is in progress. Likewise, you cannot initiate a data call while synchronizing data with PC Sync.
• UNDERSTAND THE BASICS OF SYNCHRONIZATION Nokia PC Sync remains running in the background after you synchronize for the first time. PC Sync places an icon in the Task Bar tray, indicating that the application is running. The colors of the icon change, depending on the status of the infrared connection between your phone and PC.
If at some point you change PIM applications or upgrade to a newer version of your current PIM, you must configure PC Sync to work with the new application. Select New Synchronization from the Nokia PC Suite program group, then follow the instructions on page 14.
To update PC Sync’s settings to synchronize with your custom list: Establish an infrared connection between your phone and PC. Launch Nokia PC Sync from your PC’s Start menu. If you have PC Sync enabled on startup, right-click the PC Sync tray icon, then click Configuration.
Please make sure all numbers in your PIM are formatted correctly for use with your mobile phone by removing the + character from phone numbers. , then select your custom folder. Click [ 18 ] Nokia PC Sync...
3320/3360 product section of: www.nokia.com Since the Add New Hardware Wizard for all Windows operating systems searches the A:\ drive for device drivers first, Nokia recommends that you download this file and save it to a floppy diskette.
Click Next to finalize the installation. Click Finish when Windows informs you that it has installed the device successfully. Verify that your Nokia phone connected via infrared appears in the list of modems. Complete the process by configuring your data software to work with the new infrared modem configuration.
When a successful infrared connection has been made, the infrared monitor indicates that your phone has been found. Windows 2000 installs your Nokia phone as Standard Modem over IR link. Confirm successful installation of your phone via the Phone and Modem Options Control Panel.
You may consider creating a separate set of dialing properties to use when your phone is connected to your computer, rather than changing any existing settings. The following pages are designed to help you configure some of the more popular applications for use with your Nokia phone. Dial-up Networking You may be using Microsoft’s Dial-up Networking feature to connect to your Internet service provider, or to make a remote...
• Establish an infrared connection between your phone and PC. • Use the data program’s setup menu to set your Nokia phone as the active modem. Consult the program’s User Guide or Help menu for more information. • Review the information, “Requirements for digital data calls” on page 3.
Modify “Locations” Now that your Nokia phone is configured for use by the AOL software, you need to modify your Locations settings to use your Nokia phone as the active modem. LOCATIONS SETUP To modify an existing location: From the Connection Setup screen, click the Locations tab.
AOL keyword: PDA. • CONNECTIONS PREFERENCES Before you can make data calls using your Palm OS device and your Nokia phone, you need to create a new connection device in the Connections preferences folder. Tap the Applications icon, then tap Prefs Tap the Categories drop-down menu, then tap Connection.
9 Connect to devices using Microsoft PocketPC (operating system) You can use your Nokia phone as a wireless modem with Pocket PC devices, then use these devices to check e-mail or browse the Web. You may also be able to send and receive faxes from your Pocket PC device. However, this may require additional software from another manufacturer.
To connect to your Internet service provider or corporate network: Tap the Start icon , then tap Programs. Tap Connections, then tap your new modem connection (example: Internet-Nokia phone). Enter your user name, password, and domain (if necessary). Connect to devices using Microsoft PocketPCTM OS (operating system)
Click Connect. When you have successfully logged on to the network, the Pocket PC’s status screen will show the message Device Connected. Launch your browser or e-mail application. Note: For information on how to configure the Pocket PC Web browser or e-mail software, please consult your device’s documentation.
New contact list Lotus Organizer Other Outlook New modem connection 22 New Synchronization 16 Nokia Modem Setup (Windows 2000) 20 Note capacity 11 ringing tone Notes on data calls 23 NT Workstation 4.0 and Infrared 21 Open Standard MIDI file 12...
PC Composer PC Sync PC Sync 14 automatic startup basics changing PIM applications exit application New Synchronization options starting application supported PIMs synchronize for the first time task bar icon PC Sync configuration calendar and conacts general PIM properties resolving conflicts PIM 4 PocketPC setup 26 Requirements...