Testing A New Image - Nokia IPSO 4.0 Reference Manual

b. (Optional) If the HTTP site on which the Nokia IPSO image is stored requires
c. (Optional) If the server on which the Nokia IPSO image is stored requires authentication,
3. Specify whether to de-activate installed packages (such as VPN-1/FireWall-1 packages)
after the system is rebooted with the new image.
4. Click Apply.
A message appears that tells you that the upgrade process could take a long time if the
network is slow.
5. Click Apply again.
The system downloads the specified image file.
6. To view the status of the download and installation process, click Check Status of Last New
Image Installation Operation.
7. The following message at the bottom of the list of messages indicates that the download and
installation process is complete:
To install/upgrade your packages run /etc/newpkg after REBOOT
8. If you made configuration changes, click Save.
9. You can either set your new image to be the current image for your platform (see
a new current image"
image (see

Testing a New Image

You can test an IPSO image before you permanently activate it for your platform by performing
a test boot. If you perform a test boot of an image, you can choose whether to commit the image
used for the test boot or revert to the previous image. If you do not select either option, the
system automatically reboots in five minutes using the previous image.
To test an image before activating it
1. Click Upgrade Images under Configuration > System Configuration > Images in the tree
view.
2. Click Manage IPSO images (including REBOOT and Next Boot Image Selection).
3. Select the radio button associated with the image you want to test.
4. Select one of the following options for rebooting the system:
Nokia Network Voyager for IPSO 4.0 Reference Guide
authentication, enter the HTTP realm to which authentication is needed.
enter the user name and password.
on page 173) or test the new image before you set it as the current
"To test an image before activating it"
To reboot with the image, click Reboot.
To test boot the new image, click Test Boot.
on page 175).
"To select
175