Nokia IPSO 4.0 Reference Manual page 250

6
MIB
Rate-Shape MIB
IPSO System MIB
IPSO Registration MIB
OID Registration MIB
Unit Types MIB
TCP MIB
EtherLike MIB
Host Resources MIB
IANAifType MIB
IF MIB
IP MIB
IP Forwarding MIB
ISDN MIB
VRRP MIB
RIP MIB
SNMP Framework MIB
SNMP MPD MIB
SNMP User-based SM MIB
SNMPv2 MIB
SNMPv2 SMI
250
Source Function
proprietary Monitoring rate-shaping statistics and configuration.
Monitoring system-specific parameters.
proprietary Defines the system MIB for IPSO. The IPSO chassis
temperature, fan group, and power-supply group function
only on certain firewalls.
proprietary Defines the object ID (OID) prefixes.
proprietary Defines the object ID (OID) prefixes.
proprietary Contains OID values for the different types of circuit cards
used in Nokia equipment.
RFC 2012 Provides management information of TCP implementations.
RFC 1650 Generic objects for Ethernet-like network interfaces.
RFC 1514 Provides information about the system, such as hardware,
software, processes, CPU utilization, disk utilization and so
on.
IANA Defines the IANAifType textual convention, including the
values of the ifType object defined in the MIB-II ifTable.
RFC 2233 Describes generic objects for network interface sublayers
RFC 2011 Provides management information for IP and ICMP
implementations.
RFC 2096 Displays CIDR multipath IP routes.
RFC 2127 Describes the management of ISDN interfaces.
Note: The isdnMibCallInformation trap is not supported by
IPSO.
RFC 2787 Provides dynamic failover statistics.
RFC 1724 Describes RIP version 2 protocol.
RFC 2571 Outlines SNMP management architecture.
RFC 2572 Provides message processing and dispatching.
RFC 2574 Provides management information definitions for SNMP
User-based Security Model
RFC 1907 Defines SNMPv2 entities.
Note: The warmStart trap is not supported.
RFC 2578
Nokia Network Voyager for IPSO 4.0 Reference Guide