Nokia IPSO 4.0 Reference Manual page 429

Communities are used to simplify the BGP inbound and route redistribution policies. Each
community is identified by either an ID or one of the following special community names: no
export, no advertise, no subconfed, or none.
Note
Specify the community ID and the AS number in order to generate a unique AS number-
community ID combination.
To restrict incoming routes based on their community values, see
Communities Example."
To redistribute routes that match a specified community attribute, append a community attribute
value to an existing community attribute value, or both.
Note
The examples that follows is valid only for redistributing routes from any of the specified
routing protocols to BGP. For example, configuring community-based route redistribution
policy from OSPF to BGP automatically enables the same community-based redistribution
policies for all of the other configured policies. In such an example, if you configure a route
redistribution policy for OSPF to BGP, these changes also propagate to the redistribution
policy for the interface routes into BGP.
1. Follow the steps in the
2. Match the following ASes with the following community IDs—AS 4 with community ID 1
(4:1), AS 5 with community ID 2 (5:2), AS with no export—by entering the AS values in the
AS text box and the community IDs in the Community ID/Special community text box; then
click Apply.
Note
Matching an AS with the no export option only matches those routes that have all of the
preceding AS number and community ID values.
3. To append an AS number and community ID combination to the matched routes, click on in
the Community field; then click Apply.
4. Match AS 6 with community ID 23 (6:23) by entering
Community ID/Special community text box; then click Apply.
5. Match AS with no advertise; then click Apply.
Note
Matching an AS with the no advertise option appends the community attribute with the
values described in step 2. Thus, all of the routes with the community attributes set to 4:1,
5:2, and no export are redistributed with the appended community attributes 4:1, 5:2, no
export, 6:23, and no advertise.
Nokia Network Voyager for IPSO 4.0 Reference Guide
"Redistributing OSPF to BGP Example."
"Path Filtering Based on
in the AS edit box and
6
in the
23
429