Viewing Routing Protocol Information; Displaying The Kernel Forwarding Table; Displaying Route Settings - Nokia IPSO 4.0 Reference Manual

12
Time Since Join—Time since node joined the cluster.
Work Assigned (%)—Percentage of work load assigned to this node.
Note
If your cluster is not initialized, the Cluster Monitor page contains a link to the Cluster
Configuration page, which enables you to configure cluster parameters for this node.

Viewing Routing Protocol Information

To view statistical information for routing protocols, click the appropriate link under
Monitor > Routing Protocols. You can select from the following links:
OSPF Monitor
BGP Monitor
RIP Monitor
IGRP Monitor
VRRP Monitor
PIM Monitor
DVMRP Monitor
IGMP Monitor
To monitor routing protocol information for IPv6, you can select from the following links under
Monitor > IPv6 Monitor:
OSPFv3 Monitor
RIPng Monitor
IPv6 VRRP Monitor
IPv6 Router Discovery Monitor
IPv6 Route Monitor
IPv6 Forwarding Table

Displaying the Kernel Forwarding Table

To view the IP forwarding table that the kernel is using to make its forwarding decisions, click
Forwarding Table under Monitor > Routing Protocols in the tree view.
For IPv6, click IPv6 Forwarding Table under Monitor > IPv6 Monitor.

Displaying Route Settings

To view the route settings for your system, click Route under Monitor > Routing Protocols in the
tree view.
486 Nokia Network Voyager for IPSO 4.0 Reference Guide