Isdn Network Configuration Example - Nokia IPSO 4.0 Reference Manual

3. Click Apply.
4. Under the Existing rules for NotRIP table, click the Add New Rule Before check box.
5. Click Apply.
6. Enter
7. Select ignore from the Action drop-down window in the Existing rules for NotRIP table.
8. Select isdn-s2p1c1 from the Add Interfaces drop-down window.
9. Click Apply.
10. Click Save.

ISDN Network Configuration Example

The following figure shows the network configuration for the example described below.
A Nokia IP330 Security Platform at a remote branch office connects to a Nokia IP650 Security
Platform in a company's main office through ISDN by using PPP.
Considering the nature of the traffic being transmitted and the charging rates on an ISDN
network, the ISDN interface on the Nokia IP330 in this example has its minimum-call timer set
to four minutes and its idle timer set to one minute. The Nokia IP330 is configured to send a
username and password to the main office.
The Nokia IP650 is configured so that only incoming calls that originate from the Nokia IP330 is
answered. The PPP connection is in this example, the default values for the ISDN interface are
acceptable. Therefore, no configuration of the physical interface is required.
Nokia Network Voyager for IPSO 4.0 Reference Guide
in the Dest Port Range text box in the Existing rules for NotRIP table.
520
ISDN phone
number 384020
ISDN Cloud
ISDN phone
number 38400
eth-s1p1
206.226.5.1
isdn-s4p1
206.226.15.1
206.226.15.2
isdn-s2p1
eth-s3p1
192.168.24.65
206.226.5.2
206.226.5.3
192.168.24.66
192.168.24.67
00067
61