Nokia IPSO 4.0 Reference Manual page 347

Note
In this example, the authentication method is a preshared secret, so you do not need to
select a certificate.
7. (Optional) Click the IPSec Advanced Configuration link.
8. (Optional) From the drop-down list in the Log Level field, select Info.
Click Apply.
9. (Optional) Click Up.
10. In the Policies table, enter
Click Apply.
11. In the policies table, click on rule_2.
The corresponding Configuring Policy page appears to complete the missing parameters of
the policy.
12. Select
Enter
13. If no default is selected, select Pre-Shared Secret in the Authentication Method field.
14. Enter
Click Apply.
15. Click Up to return to the IPSec General Configuration page.
16. Select IPSec Transport Rules Configuration link.
The IPSec Transport Rules page appears.
17. In the New Transport Rule text box under the IPSec Transport Rules table, enter
IPSec_trans
18. In the Select a policy text box, select rule_2.
19. Select Apply.
The new transport rule appears in the IPSec Transport Rules table.
20. Select local from the Source Filters drop-down list.
21. Select remote from the Destination Filters drop-down list.
22. Click Apply.
23. Click Save to make your changes permanent.
Nokia Network Voyager for IPSO 4.0 Reference Guide
rule_2
- 5 from the Add a Proposal drop-down list.
AH MD
in the Priority text box.
1
in the Enter Shared Secret text box and Shared Secret (Verify) text box.
secreted
.
as the name for a new policy in the New Policy text box.
347