Nokia IPSO 4.0 Reference Manual page 431

4. Enter
5. Enter
Configuring a Static Route on Platform B
1. Click Static Routes under Configuration > Routing in the tree view.
2. Enter
A.
3. Enter
4. Enter
5. Enter
Configuring an EBGP Peer on Platform A
1. Configure an EBGP peer on Platform A as in
2. Enter
3. Configure the inbound and route redistribution policies.
4. Click the link for specific peer you configured in Step 1.
This action takes you the page that lets you configure options for that peer.
5. In the Nexthop field, click on next to EBGP Multihop to enable the multihop option; then
click Apply.
6. (Optional) Enter a value in the TTL text box to set the number of hops over which the EBGP
multihop session is established.
The default value is 64 and the range is 1 to 255. Click Apply.
Configuring an EBGP Peer on Platform B
1. Configure an EBGP peer on Platform B as in
2. Enter
3. Configure the inbound and route redistribution policies.
4. Click the link for specific peer you configured in Step 1. This action takes you the page that
lets you configure options for that peer.
5. In the Nexthop field, click on next to EBGP Multihop to enable the multihop option; then
click Apply.
6. (Optional) Enter a value in the TTL text box to set the number of hops over which the EBGP
multihop session is established.
The default value is 64 and the range is 1 to 255. Click Apply.
Nokia Network Voyager for IPSO 4.0 Reference Guide
in the Additional Gateway edit box; then click Apply.
129.10.2.2
in the Additional Gateway edit box; then click Apply.
129.10.1.2
in the New static route text box to reach the loopback address of Platform
1.2.3.4
in the Mask length text box; then click Apply.
32
in the Additional Gateway edit box; then click Apply.
129.10.2.1
in the Additional Gateway text box; then click Apply.
129.10.1.1
as the local address on the main BGP configuration page. Click Apply.
1.2.3.4
as the local address on the main BGP configuration page.
5.6.7.8
"Ethernet Interfaces."
"Ethernet Interfaces."
431