Redistributing Routes To Rip And Igrp - Nokia IPSO 4.0 Reference Manual

9
BGP Route Redistribution Example
Route redistribution allows you to redistribute routes from one autonomous system into another
autonomous system.
To configure BGP route redistribution on Nokia Platform D
1. Click Route Redistribution under Configuration > Routing in the tree view.
2. Click BGP Routes Based on AS under the Redistribute to BGP section.
3. Select 100 from the Redistribute to Peer AS drop-down list.
4. Select 4 from the From AS drop-down list; then click Apply.
This procedure enables route redistribution from AS 4 to AS 100. By default, all routes that
are excluded from being redistributed from AS 4 are redistributed to AS 100.
To redistribute a single route
1. To restrict route redistribution to route 100.2.1.0/24, enter
to redistribute text box.
2. Enter
3. Select Exact from the Match Type drop-down list; then click Apply.
This procedure enables redistribution of route 100.2.1.0/24 from AS 4 to AS 100. No other
routes are redistributed.
To redistribute all routes
1. To allow all routes to redistributed, click Accept next to All BGP AS 4 routes into AS 100
field.
2. Click Apply.

Redistributing Routes to RIP and IGRP

Redistributing to RIP and IGRP is controlled by any one of three parameters:
440
Nokia
Platform A
EBGP
in the Mask length text box; then click Apply.
24
AS100
Nokia
Platform B
AS4
EBGP
Nokia
Platform D
Nokia Network Voyager for IPSO 4.0 Reference Guide
AS200
Nokia
Platform C
00339
in the New IP prefix
100.2.1.0