Activating And Deactivating The Cops Client; Changing The Client Id Associated With Specific Diffserv Configuration; Deleting A Client Id - Nokia IPSO 4.0 Reference Manual

10

Activating and Deactivating the COPS Client

You must activate the COPS client to implement the COPS module you configure. You can
deactivate the COPS client to halt the COPS module implementation.
1. Click COPS under Configuration > Traffic Management in the tree view.
2. Click the Start button in the COPS client field to activate the COPS client; click the Stop
button to deactivate the COPS client.
3. Click Apply.
4. Click Save make your change permanent.
When you deactivate the COPS client, you can maintain any existing module and role
configuration. This configuration remains available if you reactivate the COPS client.
Changing the Client ID Associated with Specific Diffserv
Configuration
You can change a client ID on a running system. Typically, each client ID refers to a specific
policy or set of policies.
1. Click COPS under Configuration > Traffic Management in the tree view.
2. Click the Diffserv PIB link in the Configured COPS Module section. This action takes you
to the COPS Diffserv specific configuration page.
3. In the Diffserv PIB specific configuration section, click the Client ID drop-down window
and select the client ID name you now want to run. Click Apply. The name of the client ID
you selected now appears in the Client ID field.
Note
A list of all existing Client IDs appears in the COPS Security configuration section.
4. Click Save to make your change permanent.

Deleting a Client ID

Before you delete a Client ID, make sure that it is not active. Perform the following steps to
deactivate a client ID before you delete it.
To disable and delete a Client ID
1. Click COPS under Configuration > Traffic Management in the tree view.
2. Click the Diffserv PIB link in the Configured COPS Module section.
The COPS Diffserv specific configuration page appears.
3. To disable the Client ID, click the Client ID drop-down list in the DiffServ PIB specific
configuration section and select either another existing client ID name or none.
464 Nokia Network Voyager for IPSO 4.0 Reference Guide