Nokia IPSO 4.0 Reference Manual page 396

9
4. Click Apply, and then click Save to make your changes permanent.
To add and configure many static routes at the same time
1. Click Static Routes under Configuration > Routing Configuration in the tree view.
2. In the Quick-add static routes field, click the Quick-add next hop type drop-down list, and
select Normal, Reject, or Black hole.
The default is Normal. For more information on static route types, see
page 394.
3. In the Quick-add static routes edit box, enter an IP address, its mask length, and add one or
more next-hop IP addresses for each static route you want to add. Use the following format:
IP address/mask length next hop IP address
The IP addresses must be specified in a dotted-quad format ([0 to 255]).[0 to 255].[0 to
255].[0 to 255])
The range for the mask length is 1 to 32.
For example, to add a static route to 205.226. 10.0 with a mask length of 24 and next hops of
10.1.1.1 and 10.1.1.2, enter:
205.226.10.0/24 10.1.1.1 10.1.1.2
4. Press Enter after each entry you make for a static route.
Note
You cannot configure a logical interface through the quick-add static routes option.
5. Click Apply.
The newly configured additional static routes appear in the Static Route field at the top of
the Static Routes page.
Note
The text box displays any entries that contain errors. Error messages appear at the top
of the page.
6. Click Save to make your changes permanent.
396 Nokia Network Voyager for IPSO 4.0 Reference Guide
"Static Routes" on