Table of Contents
Advertisement
• LEARN ABOUT OTHER VIEWS
In addition to using the standard music staff to compose new ringing tones, the following options are available:
•
Tracker is used to display notes as events on a time line as well as other MIDI and tempo data.
•
General is used to set Song Title, overall tempo, and adjust overall pitch up or down.
Use to set name of
ringing tone as it
appears in phone
Set overall tempo
of ringing tone
Raise or lower
overall pitch of
ringing tone
Click the Switch view button
then click General.
• COMPOSE A NEW RINGING TONE
Your new ringing tone can consist of up to approximately 70 notes and rests. The
phone discards any notes or rests beyond 70. Use the note counter to the right of
the status bar to monitor the length of your new ringing tone.
Create a new ringing tone
1
Launch Nokia PC Composer (Start > Programs > Nokia PC Suite > Nokia PC
Composer).
2
Click the appropriate note or rest button.
3
Using the insert point, click the desired line or space on the staff
The result is that the note is placed on the staff, and is played by your PC's sound card.
4
Enter any additional notes and rests until you have completed your new ringing tone.
5
Click the Play button
Enter notes using the keyboard
In addition to placing the notes on the staff using the mouse, you can also enter
the pitches from your computer keyboard. The Recording Keyboard is displayed and
identifies the computer keyboard equivalents to notes on a piano or MIDI
keyboard.
1
Click the Record button
2
Click the desired note value button on the toolbar.
3
Press the key on your computer keyboard associated with the desired note.
Tip: If you want a longer or shorter note, select the desired note value from the toolbar, then enter the desired pitch from
your keyboard. Note values cannot be selected from your computer keyboard.
to cycle through the various view options.To view the General information pane, click Tools,
to play the ringing tone from the beginning.
to display the recording keyboard.
[ 10 ]
Nokia PC Composer
Use to add notes,
adjust note pitch
or value, and
modify tempo
Use to create text
note to be saved
as a part of the
.ott or MIDI file
Insert point
5
Advertisement
Table of Contents
