HP DesignJet 2500CP Service Manual page 79

Message Explanation and Action
Replace ink You are in the ink system replacement process, and opened the left door when
cartridge(s) instructed.
JJJ-
The printer is waiting for you to replace the ink cartridges indicated by flashing
squares.
Replace lens cover You are in the ink system replacement process, and lifted the window when
Continue instructed.
The printer is waiting for you to replace the lens cover on the printhead carriage
with a new one. Spare lens covers are inside the right door. Press
when you have completed the lens replacement.
Replace You are in the ink system replacement process, and lifted the window when
printhead(s) instructed.
JJ-J
The printer is waiting for you to replace the printheads indicated by flashing
squares.
Replace You are in the ink system replacement process, and lifted the window when
printhead(s) instructed.
Close window
The printer is waiting for you to replace a printhead, or you can close the
window without making any changes.
Replace JJJ-
You are in the ink system replacement process, and opened the right door when
Close right door instructed.
The printer is waiting for you to replace the printhead cleaners indicated by *s,
and then close the right door.
Replacement of ink You are about to finish the ink system replacement process, and the printer
system recommends replacing one or more of the four ink systems (for example, because
recommended they have passed their specified life).
Press the
press the
indicated.
Replacement of lens The printhead alignment procedure, or the printhead check procedure, or a
cover calibration check has failed because the lens cover is dirty and needs replacing.
recommended Printing may continue but the image quality is not assured.
Press
door.
Resource area full (HP DesignJet 2500CP/3500CP only) The printer's hard disk is full. You are
Unable to save res. attempting to save resources. The printer is unable to process the request.
You need to remove some of the resources from the hard disk, for example, saved
print files, halftones, or fonts that you don't use. Then try saving the resource
again.
User Messages
key to continue. You will see the status message ILow on inkI. Then
Replace Ink System key to replace the ink systems that will be
to continue. Replace the lens cover. Spare lens covers are inside the right
HP DesignJet CP Series Printers
to continue
3-13