System Error: 010100; System Error: 010101; System Error: 010102 - HP DesignJet 2500CP Service Manual

System Error:
Problem Description: Error reading the EEROM.
Corrective Action:
System Error:
Problem Description: An action outside the EEROM limits has been
Corrective Action:
System Error:
Problem Description: Physical EEROM write and/or write operations
Corrective Action:
2-16
010100
Replace the Electronics Module ' page 8 6.
010101
performed.
Make sure you have the latest version of the Flash
SIMM (firmware) installed or upgrade the
firmware revision of the Flash SIMM ' page 1 3. If
the error code remains after installing the latest
Flash SIMM then report the error to the HP
Response Center or the nearest HP Support Office,
stating the following information:
D Model and Serial Number of the printer.
D the complete error number.
D service print (Utilities / Service Tests).
D plot file where the error has occurred.
D additional comments about the usage, the
setting, etc..
010102
failed. The EEROM data that is written does not
match the data that is read.
Replace the Electronics Module ' page 8 6.
HP DesignJet CP Series Printers
System Error Codes