System Error: 010042 0000000X - HP DesignJet 2500CP Service Manual

System Error:
Problem Description: The status of one of the optical sensors is not
Corrective Action:
2-14
010042 0000000X
stable when it should be.
Error data (X):
0 ³ Problem with the Media Sensor.
1 ³ Problem with the Pinch arm Sensor.
2 ³ Problem with the Refill Assembly Sensor.
3 ³ Problem with the Elevator Sensor.
4 ³ Problem with the Service Station Sensor.
5 ³ Problem with the Primer Sensor.
Try the following:
D Make sure that all sensors are connected
correctly.
D If the error code is related to the Service
Station or the Primer then:
S Make sure that the Service Station
Interconnect Cable (the black cable that
connects the Service Station to the
Electronics Module) is correctly connected to
the Electronics Module.
S Replace the Service Station Interconnect
cable ' Page 8 87.
D If the error code is related to the Refill
Assembly or the Elevator then:
S Make sure that the Refill Interconnect Cable
(the black cable that connects the Refill
Assembly and Elevator to the Electronics
Module) is correctly connected to the
Electronics Module.
S Replace the Refill Interconnect cable '
Page 8 87.
D If the Error is related to the Pinch arm sensor
then replace the Pinch arm Sensor ' Page 8 84.
D If the Error is related to the Refill Assembly
Sensor then replace the Refill Assembly '
Page 8 55.
HP DesignJet CP Series Printers
System Error Codes