System Error: 0000D8; System Error: 010020 - HP DesignJet 2500CP Service Manual

Important Information on Troubleshooting Error Codes
Before spending time troubleshooting the problem by doing the various tests
or replacing parts (which may not need replacing), check which firmware
revision the printer is using or check if a service note deals with this
particular problem. Some problems which occurred in earlier firmware
releases may have been solved in later revisions. So if there is a new firmware
revision then update the Flash SIMM before replacing any parts. Refer to
page 1 3 for information on how to upgrade the firmware revision. Refer to
Chapter 7 for the part number of the Flash SIMM.
System Error:
Problem Description: Library Error.
Corrective Action:
System Error:
Problem Description: The Checksum read on the Flash SIMM is
Corrective Action:
System Error Codes
0000D8 XXXXXXXX
Refer to System Error Code 07xxxx.
010020
incorrect.
Try the following:
D Reseat the Flash SIMM.
D Replace the Flash SIMM.
D Replace the Electronics Module ' page 8 6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.
HP DesignJet CP Series Printers 2-3