System Error: 010037; System Error: 010038 - HP DesignJet 2500CP Service Manual

System Error:
Problem Description: ADC Test Failure in the Carriage PCA.
Corrective Action:
System Error:
Problem Description: A Printhead voltage could not be set Main PCA
Corrective Action:
2-12
010037
Try the following:
D Make sure that the Trailing Cable is connected
correctly.
D Replace the Trailing Cable ' page 8 36.
D Replace the Carriage Assembly ' page 8 42.
D Replace the Electronics Module ' page 8 6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.
010038
Failure.
Try the following:
D Make sure that the Trailing Cable is connected
correctly.
D Replace the Trailing Cable ' page 8 36.
D Replace the Electronics Module ' page 8 6.
D Replace the Carriage Assembly ' page 8 42.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.
HP DesignJet CP Series Printers
System Error Codes