D13. Printhead ID
The purpose of this test is to verify the default settings of the printheads.
Perform the Printhead ID test as follows:
1 In the Diagnostics submenu, scroll to D13 Printhead ID" and press
Enter.
Diagnostics
D13 Printhead ID
2 If the Printer is using HP DesignJet CP Ink System (Inks for
Imaging), the following message will be displayed on the front panel.
C:200000 M:200000
Y:200000 B:200000
3 If the Printer is using HP DesignJet CP Ink System UV (UV Durable
Inks), the following message will be displayed on the front panel.
C:220000 M:220000
Y:220000 B:220000
This test is for information only. This information might be requested
in the event of an escalation in order to understand the problem.
4 Press Previous when you have completed the test. The D1300 Done"
message is displayed on the front panel if the test exits correctly.
4-26
HP DesignJet CP Series Printers
Service Tests