D17. Reset Counters - HP DesignJet 2500CP Service Manual

D17. Reset Counters

The purpose of this test is to reset the internal counters.
Perform the Reset Counters test as follows:
This test does not reset the Preventive Maintenance Counter. To
reset the preventive Maintenance Counter perform the
Maintenance Calibration ' 5 18.
1 In the Diagnostics submenu, scroll to D17 Reset Counters" and press
Enter.
Diagnostics
D17 Reset Counters
2 The Yes=Enter No=Prev" message is displayed on the front panel.
3 If you DO NOT want to reset the counters, press the Previous key. The
message D1700 Cancelled" will be displayed.
4 If you want to reset the counters, press the Enter key. While the counters
are being reset, a row of ***" will be displayed on the front panel.
5 When the Counters have been reset, the D1700 OK" message is displayed
on the front panel.
6 If the test fails, the D1701 Fail" message is displayed on the front panel.
If the test fails, Replace the Electronics Module ' page 8 6.
4-30 HP DesignJet CP Series Printers Service Tests