System Error: 010033; System Error: 010034 000X0000 - HP DesignJet 2500CP Service Manual

System Error:
Problem Description: The DC Motor Driver ASIC Test Failed.
Corrective Action:
System Error:
Problem Description: One of the DC Motors has failed.
Corrective Action:
2-8
010033
Replace the Electronics Module ' page 8 6.
010034 000X0000
Error data:
00010000 ³ Y axis Motor Failed.
00020000 ³ X axis Motor Failed.
00030000 ³ Both DC Motors Failed.
Try the following:
D Make sure that both DC Motors are connected
correctly.
D If the error code is related to the Y axis motor:
S Make sure that the Refill Interconnect Cable
(the black cable that connects the Refill
Assembly to the Electronics Module) is
correctly connected to the Electronics Module.
S Replace the Refill Interconnect PCA '
page 8 64.
S Replace the Y axis Motor Assembly '
Page 8 45.
D If the error code is related to the X axis Motor,
replace the X axis Motor Assembly ' Page 8 66.
D If both DC Motors fail, replace the Electronics
Module ' page 8 6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.
HP DesignJet CP Series Printers
System Error Codes