HP DesignJet 2500CP Service Manual page 70

Message Explanation and Action
Edge not found The printer could not find edge of media during loading procedure.
Reload media
Check the leading edge of the media for unevenness or tears; cut a straight edge,
if necessary, and reload. Be sure to position the right edge along the perforated
line on the entry platen when loading.
Error processing job An error was encountered while the print was being processed. The print has
Flushing rest of been lost.
job
Press
Fatal disk error (HP DesignJet 2500CP/3500CP only)
Continue
Press
persists, Replace the Hard Disk Drive.
Head cleaner full Either: After finishing printing, the printer has detected that one or more of
JJ-J
the printhead cleaners are full of ink. The squares that are flashing indicate
the head cleaners that are full.
Press
If you press
in the head cleaner may overflow and the print quality of your images may be
affected. To fix the problem, select
Or: In the ink system replacement process, one or more of the printhead cleaners
have not been replaced at the same time as the corresponding printheads. The
squares that are flashing indicate the head cleaners that are full.
Press
may be affected, as indicated by a subsequent message.
Head cleaner ink One or more of the printhead cleaners are full of ink, and the ink may overflow.
may overflow
P ress
inside the printer and damage it. Replacement of the ink systems affected is
recommended.
Head cleaner The printer has detected that one or more printhead cleaners have
dislodged or the printer cannot detect them, as indicated by the flashing
removed
JJ-J
squares. Printing is disabled.
Press
immediately.
the entire ink system (printhead, printhead cleaner, and ink cartridge)
using the Replace Ink System key.
If you don't correct the error now, you will see the status message "Ink
system error".
3-4
HP DesignJet CP Series Printers
to delete the print.
An error on the hard disk has been detected.
to continue. Retry the operation by cycling the power. If the problem
to continue. The message [Check ink system
again to continue, you may still be able to print again, but the ink
to continue. You may still be able to print again, but image print quality
to continue. Image print quality may be affected, and ink may leak
to check the failing head cleaner. You should reseat the head cleaners
If this does not solve the problem, you will have to replace
/ Ignore
to check the ink system.
become
User Messages
{is displayed.