Installing The Headlight Mask With The Headlight; Changing The Headlight Bulb - KTM 150 XC-W 2018 Owner's Manual

15.6

Installing the headlight mask with the headlight

15.7

Changing the headlight bulb

Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Main work
–
Connect plug-in connector
E00357-11
–
Position the headlight mask and fix it with rubber bands
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line
guide.
E00355-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
socket counterclockwise all the way and remove it.
–
Pull bulb socket
E00358-10
15 ELECTRICAL SYSTEM
1
.
p. 110)
1
together with the underlying bulb
2
of the parking light out of the reflector.
2 .
p. 108)
109