Installing The Headlight Mask With The Headlight; Changing The Headlight Bulb - KTM 500 EXC F 2024 Owner's Manual

15.6

Installing the headlight mask with the headlight

15.7

Changing the headlight bulb

Main work
–
Join plug-in connectors
W00350-11
–
Position the brake line in the brake line guide.
–
Position the headlight mask.
The holding lugs engage in the fender.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
W00349-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn LED unit
of the reflector.
Guideline
Only touch the LED unit on the cooling element.
I00431-10
–
Insert the LED unit into the reflector and turn it clockwise all
the way.
Headlight (LED)
Info
Ensure that O-ring
I00432-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
ELECTRICAL SYSTEM 15
1
.
2
.
M6 10 Nm (7.4 lbf ft)
p. 116)
1
counterclockwise all the way and take it out
2
is seated properly.
p. 116)
p. 114)
p. 115)
115