Preparing Air Filter Box Cover For Securing; Removing The Main Silencer; Installing The Main Silencer - KTM 250 EXC 2024 Owner's Manual

12.27

Preparing air filter box cover for securing

12.28

Removing the main silencer

Warning
Danger of burns The exhaust system gets hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
12.29

Installing the main silencer

Finishing work
–
Install the air filter.
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Drill a hole at marking
Guideline
Diameter
W00334-10
Finishing work
–
Install the air filter box cover. (
–
Remove screws
–
Pull off the main silencer with exhaust sleeve
spring ring from the manifold.
S05505-10
–
Mount the main silencer with rubber sleeve
rings.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
S05506-10
SERVICE WORK ON THE CHASSIS 12
( p. 74)
p. 73)
p. 72)
A
.
6 mm (0.24 in)
p. 73)
1
.
2
.
M6 10 Nm (7.4 lbf ft)
2
and the
1
and the spring
75