Adjust The Volume - CyberData 011307 Operation Manual

To restore the factory default settings:
1. Press and hold the RTFM button (SW1) for more than five seconds.
2. The device announces that it is restoring the factory default settings.
Note

2.3.7 Adjust the Volume

You can adjust the volume through the
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
The device will use DHCP to obtain the new IP address (DHCP-assigned address or default
to 10.10.10.10 if a DHCP server is not present).
930935A
Installing the VoIP Indoor Intercom with Keypad
Figure 2-13. RTFM Button
Device Configuration Page.
18
Intercom Setup
SW1
CyberData Corporation