Configure The Autoprovisioning Parameters - CyberData 011307 Operation Manual

2.4.13 Configure the Autoprovisioning Parameters

Autoprovisioning can be used to configure your device automatically on boot, after a periodic delay,
after sitting idle for a period of time, or at a specified time.
The autoprovisioning file contains the board configuration in xml format. Autoprovisioned values in
this file will override values stored in on-board memory.
The autoprovisioning file can be hosted with a tftp or a web server and by default is named according
to the MAC address of the device (for example: 0020f7350058.config). The autoprovisioning
filename can also be specified.
The device does not have a real time clock but can sync with a network time server on boot.
1. Click the Autoprovisioning button to open the Autoprovisioning Configuration page. 
See
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 2-29.
Figure 2-29. Autoprovisioning Configuration Page
930935A
Installing the VoIP Indoor Intercom with Keypad
CyberData Corporation
57
Intercom Setup