Upgrade The Firmware And Reboot The Intercom - CyberData 011307 Operation Manual

2.5 Upgrade the Firmware and Reboot the Intercom

GENERAL ALERT
To upload the firmware from your computer:
1. Retrieve the latest Intercom firmware file from the VoIP Indoor Intercom with Keypad
Downloads page at:
http://www.cyberdata.net/products/voip/digitalanalog/singlewireintercomindoorkeypadv3/downloads.html
2. Unzip the firmware version file. This file may contain the following:
• Firmware file
• Release notes
3. Log in to the Intercom home page as instructed in
Home
4. Click the Update Firmware button to open the Upgrade Firmware page. See
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Caution
Equipment Hazard: Devices with a serial number that begins with 1861xxxxx
can only run firmware versions 10.0.0 or later.
Page".
930935A
Installing the VoIP Indoor Intercom with Keypad
Section 2.4.3, "Log in to the Configuration
CyberData Corporation
64
Intercom Setup
Figure 2-32.