Configure The Network Parameters - CyberData 011307 Operation Manual

2.4.5 Configure the Network Parameters

1. Click the Networking button to open the Network Configuration page
2. On the Network Configuration page, enter values for the parameters indicated in
Web Page Item
Stored Network Settings
IP Addressing
IP Address
Subnet Mask
Default Gateway
DNS Server 1
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 2-16. Network Configuration Page
Table 2-8. Network Configuration Parameters
Description
Shows the settings stored in non-volatile memory.
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
go to Step Note.
Enter the Static IP address.
Enter the Subnet Mask address.
Enter the Default Gateway address.
Enter the DNS Server 1 address.
930935A
Installing the VoIP Indoor Intercom with Keypad
(Figure
Table 2-8 . If you select DHCP,
CyberData Corporation
28
Intercom Setup
2-16).
Table 2-8.