Configure The Night Ringer Parameters - CyberData 011307 Operation Manual

2.4.8 Configure the Night Ringer Parameters

When the Nightringer is enabled, the Intercom will register as a second SIP extension. Registration
does not have to be to the same server as the primary SIP registration. Any calls made to the
Nightringer extension will cause the Intercom to play a ring tone. There is no way to answer this call.
The Nightringer is designed to be used in buildings where calls made after hours are directed to a
ring group.
1. Click on the Nightringer button to open the Nightringer Configuration page. See
2. On the Nightringer Configuration page, enter values for the parameters indicated
in
Web Page Item
Enable Nightringer
Nightringer Settings
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 2-20. Nightringer Configuration Setup
Table 2-13.
Table 2-13. Nightringer Configuration Parameters
930935A
Installing the VoIP Indoor Intercom with Keypad
Description
When the nightringer is enabled, the unit will attempt to
register a second extension with the SIP server. Any calls
made to this extension will play a ringtone.
39
Intercom Setup
Figure 2-20.
CyberData Corporation