Avaya 4900 Series Manual
  1. Manuals
  2. Brands
  3. Avaya Manuals
  4. Switch
  5. 4900 Series
  6. Manual

Avaya 4900 Series Manual

Installing transceivers and optical components on ethernet routing switch
Hide thumbs Also See for 4900 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Installing Transceivers and Optical
Components on Avaya Ethernet Routing
Switch 4900 and 5900 Series
Release 7.1
NN47211-302
Issue 02.02
April 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4900 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Avaya 4900 Series

Summary of Contents for Avaya 4900 Series

  • Page 1 Installing Transceivers and Optical Components on Avaya Ethernet Routing Switch 4900 and 5900 Series Release 7.1 NN47211-302 Issue 02.02 April 2016...
  • Page 2 CHANNEL PARTNER (AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH AVAYA OR AN AVAYA CHANNEL PARTNER. Avaya is not responsible for the contents or reliability of any linked UNLESS OTHERWISE AGREED TO BY AVAYA IN WRITING, websites referenced within this site or documentation provided by AVAYA DOES NOT EXTEND THIS LICENSE IF THE SOFTWARE Avaya.
  • Page 3 OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL written consent of Avaya can be a criminal, as well as a civil offense INFORMATION FOR H.264 (AVC) AND H.265 (HEVC) CODECS under the applicable law.
  • Page 4 Marks without prior written consent from Avaya or such third party which may own the Mark. Nothing contained in this site, the Documentation, Hosted Service(s) and product(s) should be construed as granting, by implication, estoppel, or otherwise, any license or right in and to the Marks without the express written permission of Avaya or the applicable third party.

  • Page 5: Table Of Contents

    Laser eye safety danger statement ............ 59 Laser eye safety connector inspection danger statement ................ 60 Connector cleaning safety danger statement April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 6 Contents .................. 61 Optical fiber damage warning statement .............. 62 Optical fiber connector damage warning statement ..................... 64 SFP damage warning statement Glossary........................... 66 April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 7: Chapter 1: Introduction

    Release Notes for Avaya Ethernet Routing Switch 4900 and 5900 Series, NN47211-400. For more information about how to configure security, see Configuring Security on Avaya Ethernet Routing Switch 4900 and 5900 Series, NN47211-505. For the current documentation, see the Avaya Support web site: www.avaya.com/support.

  • Page 8: Searching A Documentation Collection

    Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot Avaya products. About this task Videos are available on the Avaya Support website, listed under the video document type, and on the Avaya-run channel on YouTube. Procedure •...

  • Page 9: Subscribing To E-Notifications

    3. Under My Information, select SSO login Profile. 4. Click E-NOTIFICATIONS. 5. In the GENERAL NOTIFICATIONS area, select the required documentation types, and then click UPDATE. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 10 8. Scroll through the list, and then select the product name. 9. Select a release version. 10. Select the check box next to the required documentation types. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 11: Support

    3. Enter the product name, and a release. 4. Select Product Lifecycle Notices. 5. Click Enter. 6. Select the End of Sale notice to view the information. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 12: Chapter 2: New In This Document

    Chapter 2: New in this document The following sections detail what is new in Installing Transceivers and Optical Components on Avaya Ethernet Routing Switch 4900 and 5900 Series, NN47211-302 for Release 7.1. 10GBASE-BX10 The switch platforms support 10GBASE-BX SFP+ bi-directional SFP+ Ethernet transceiver. For...

  • Page 13: Chapter 3: Safety And Equipment Care Information

    Fiber optic cable care Although reinforcing material and plastic insulation protects the glass fiber in fiber optic cable, it is subject to damage. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 14: Fiber Optic Connector Care

    The proper connector cleaning method depends on the connector contaminants: • Judge cleanliness by visual inspection with a fiber microscope. First inspect the connector, and then clean as required. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 15: Cleaning Single Connectors

    To avoid getting debris in your eyes, wear safety glasses when you work with the canned air duster. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 16: Cleaning Duplex Connectors

    To avoid getting debris in your eyes, wear safety glasses when you work with the canned air duster. To avoid eye irritation on contact, wear safety glasses when you work with isopropyl alcohol. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 17: Cleaning Receptacles

    To avoid contamination, only clean optical ports if you see evidence of contamination or reduced performance exists, or during their initial installation. To prevent oil contamination of connectors, use only high-quality canned compressed air. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 18 If you do not reinstall the connector, use a protective cap. If problems persist, ensure that the connector or receptacle is free from damage. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 19: Chapter 4: Sfp

    To expand available bandwidth on a common optical fiber, use Coarse Wavelength Division Multiplexing (CWDM) SFP transceivers. 4. Determine if you need digital diagnostic monitoring (DDM). DDM is enabled by default. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 20 Not all SFP transceivers or products support DDM. Job aid The following table describes the reach provided by various SFP transceivers. This table is informational only — not all Avaya Ethernet switching and routing products support all the SFP transceivers listed here. Table 1: Supported SFP transceivers...
  • Page 21 1000BASE-SX DDI 850 nm, gigabit AA1419048-E6 Ethernet, duplex LC connector 1000BASE-LX DDI 1310 nm, gigabit AA1419049-E6 Ethernet, duplex LC connector Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 22 11. 1000BASE-XD DDI gigabit Ethernet, AA1419053-E6 to duplex LC AA1419060-E6** connector These transceivers have reached end- of-sale (EOS). For Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 23 1000BASE-EX DDI 1550 nm, gigabit AA1419071-E6** Ethernet, duplex LC This transceiver connector has reached end- of-sale (EOS). For more information Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 24: Installing An Sfp

    Depending on the module type, you must insert some SFP transceivers into the port with the bail facing up and some SFP transceivers with the bail facing down. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 25 In the following figure, the SFP transceiver uses the bore plug. Pull the bail to release the device. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 26: Removing An Sfp

    This section provides technical specifications for the supported small form factor pluggable (SFP) models. Use this information to aid in proper network design. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 27: Sfp Labels

    (BER) of 10 SFP labels The Avaya label on a typical SFP transceiver contains an Avaya serial number, a bar code, a manufacturer code, an interface type, and a part number.

  • Page 28: Supported Sfp Transceivers

    • up to 275 m using 62.5 µm MMF optic cable • up to 550 m using 50 µm MMF optic cable Wavelength 850 nanometers (nm) Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 29 (nm) using single mode or multimode optical fiber. The 1000BASE-LX SFP transceiver supports only full-duplex operation. The part number is AA1419015-E5*. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 30 CWDM OADM or CWDM OMUX. Table 7: 1000BASE-XD CWDM (40 km) SFP specifications Parameter Specifications Connectors Duplex LC Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 31 20 dB Transmitter characteristics Launch power –3.0 to 2.0 dBm Receiver characteristics Receiver sensitivity –23 dBm Maximum input power –3.0 dBm April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 32 • Up to 10 kilometers (km) using SMF Data rate 1.0 Gbps Line rate (8B/10B code) 1.25 Gbps Link optical power budget 9.5 dB Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 33 To prevent damage to the optical receiver, ensure that at least 3 dB of attenuation exists between the transmit and receive ports. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 34 SMF, 9 μm Data rate 1.0 Gbps Line rate (8B/10B code) 1.25 Gbps Link optical power budget 24 dB Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 35 1 dB at 40 km Transmitter characteristics Launch power –4.0 to 1.0 dBm Receiver characteristics Receiver sensitivity –21 dBm Maximum receiver power –3.0 dBm April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 36 6 dB of attenuation. Damage can result if insufficient attenuation is provided or if the same 1000BASE-BX SFP transceivers are connected. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 37 1310 nm and 1490 nm Link optical power budget 11.0 dB Maximum transmitter and dispersion power penalty 3.3 dB Transmitter characteristics Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 38 To prevent damage to the optical receiver, ensure that at least 14 dB of attenuation exists between the transmit and receive ports. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 39 14 dB ports Transmitter characteristics Launch power 0 to 5.0 dBm Receiver characteristics Receiver sensitivity –30 dBm Maximum receiver power –9.0 dBm April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 40: Chapter 5: Sfp

    + transceivers before installation or use. SFP+ transceivers support 10 Gbps connections, but are not compatible devices. Important: Avaya recommends that you only use Avaya qualified transceivers. If you use other vendor transceivers, Avaya does not support them. Selecting an SFP+ Use an SFP+ transceiver to interface a port to a fiber optic cable.
  • Page 41 SFP+ transceivers are hot-swappable input and output enhancement components that allow 10- gigabit connections. All Avaya SFP+ transceivers use LC connectors to provide precision keying and low interface losses. The following table lists and describes the Avaya SFP+ transceiver models.

  • Page 42: Installing An Sfp

    About this task Installing an SFP+ transceiver takes approximately 3 minutes. Procedure 1. Remove the SFP+ transceiver from its protective packaging. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 43 SFP+ transceivers are similar to SFP transceivers in physical appearance. In the following figure, the SFP+ transceiver still contains the bore plug. Pull the bail to release the device. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 44: Removing An Sfp

    5. Store the SFP+ transceiver in a safe place until needed. Important: If you discard the SFP+ transceiver, dispose of it according to all national laws and regulations. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 45: Sfp+ Specifications

    Avaya does not support them. SFP+ labels The typical Avaya SFP+ transceiver has a label on the top and bottom or side of the transceiver. The following figures show example labels. Avaya does use alternate labels, depending on the size of the device and space available for label information.

  • Page 46: Supported Sfp+ Transceivers

    • 400 MHz-km fiber: 2 to 66 m • 500 MHz-km fiber: 2 to 82 m • 2000 MHz-km fiber: 2 to 300 m Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 47 Maximum transmitter waveform and dispersion 4.7 dB penalty (TWDP) Transmitter characteristics Average launch power –6.5 to 0.5 dBm Peak launch power 3 dBm Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 48 The following abbreviations are used in the preceding tables: • FDDI – Fiber Distributed Data Interface • ISO – International Standards Organization April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 49 Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter shutdown condition. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 50 • No power supplied to the PDM. • Laser shutdown for safety conditions. • Activation of PMD_global_transmit_disable or other optional transmitter shutdown condition. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 51 Average launch power 0 to 4.0 dBm Optical modulation amplitude (minimum) –1.7 dBm Extinction ratio (ER) (minimum) 8.2 dB Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 52 9.95 Gbps to 10.313 Gbps Center wavelength Nominal –6.5 nm to nominal +6.5 nm Spectral width (RMS at –20 dB) 1 nm Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 53 The following table lists the transmitter and receiver specifications for the 10GBASE-ZR CWDM DDI SFP+ transceiver. Table 31: 10GBASE-ZR CWDM DDI SFP+ specifications Parameter Specifications Transmitter characteristics Table continues… April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 54 1270 nm Rx up to 10 km Paired with AA1403169-E6 The following table lists the specifications for the 10GBASE-BX SFP+ transceivers. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 55 –14.4 to +0.5 dBm Maximum receiver sensitivity in OMA –12.6 dBm Maximum receiver reflectance –12 dB Stressed receiver sensitivity in OMA –10.3 dBm April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 56: Chapter 6: Translation Of Safety Messages

    April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 57: Electrostatic Discharge Caution Statement

    ESD pode danificar circuitos eletrônicos. Não toque em equipamentos eletrônicos a menos que esteja utilizando pulseira de aterramento ou outro dispositivo para dissipação de energia estática. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 58: Laser Eye Safety Danger Statement

    óptica o conector. Siempre asuma que los cables de fibra óptica están conectados a una fuente de luz. Danger: PERIGO April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 59: Laser Eye Safety Connector Inspection Danger Statement

    Cuando inspeccione un conector, controle que las fuentes de luz estén apagadas. La fuente de luz que utilizan los cables de fibra óptica puede ocasionar daños en la vista. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 60: Connector Cleaning Safety Danger Statement

    Die für die Glasfaserkabel verwendeten Lichtquellen können Augenschäden hervorrufen. Zum Schutz vor Schmutzteilchen tragen Sie eine Schutzbrille, wenn Sie mit einem Pressluft-Spray April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 61: Optical Fiber Damage Warning Statement

    Do not crush fiber optic cable. If fiber optic cable is in the same tray or duct with large, heavy electrical cables, the weight of the electrical cable can damage the fiber optic cable. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 62: Optical Fiber Connector Damage Warning Statement

    Optical fiber connector damage warning statement Warning: Risk of equipment damage April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 63 Maneje los conectores con cuidado para no contaminar la superficie de los casquillos con la grasa de los dedos ni otros contaminantes. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 64: Sfp Damage Warning Statement

    Afin d'éviter tout risque d'insertion incorrecte, les modules SFP sont verrouillés. Si vous ne parvenez pas à insérer un module SFP, ne forcez pas. Retournez-le et renouvelez l'opération. Warning: WARNUNG Risiko von Geräteschäden April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 65 Gli SFP dispongono di chiavi in modo da evitarne l'inserimento errato. Se l'SFP resiste alla pressione, non forzarlo ma capovolgerlo e reinserirlo. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

  • Page 66: Glossary

    Ethernet technology with speeds up to 10 Gbps. (GbE) light emitting diode A semiconductor diode that emits light when a current passes through it. (LED) April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...
  • Page 67 A cable with one or more pairs of twisted insulated copper conductors pair (UTP) bound in a single plastic sheath. April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900 Series Comments on this document? infodev@avaya.com...

This manual is also suitable for:

5900 series

Table of Contents